KYZEN to Show Stencil Cleaning Solvents at SMTA Aguascalientes Expo and Tech Forum

Reading time ( words)

KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Aguascalientes Expo and Tech Forum, scheduled to take place Thursday, June 1, 2023 at the Aguascalientes Marriott Hotel in Aguascalientes, Mexico. The KYZEN team will highlight both KYZEN E5631J and CYBERSOLV© C8882 stencil cleaning chemistries for understencil wiping.

KYZEN E5631J is a cost-effective, ready-to-use solution for removing all types of raw solder paste in both online and offline cleaning processes to ensure every print counts. Formulated with the worker and environment in mind, it has proven compatibility with standard stencils, cleaning equipment, and printer manufacturers.

CYBERSOLV C882 is a solvent-based stencil cleaning fluid that can quickly dissolve all flux constituents within solder paste when used in understencil wipe processes, hand-wiping, ultrasonic cleaning systems and spray systems designed for solvents. Approved for use by several printer manufacturers, this fast-drying fluid leaves no residue when applied in cleaning solder paste, uncured SMT adhesives and flux from stencils, misprinted PCBs, stencil tools, and printing squeegees.  

KYZEN E5631J and CYBERSOLV C8882 both provide proven and cost-effective options in removing solder paste in understencil wipe processes.


Suggested Items

Advice to the Learner

05/03/2023 | Barry Matties, I-Connect007
Barry Matties chats with both Dale Lee and Alexander Noggle, a college student attending SMTA Houston Expo & Tech Forum, about the need to listen to the past but keep an eye on the future, especially when it comes to understanding technology. For now, Dale says, get out and gain as much industry experience as possible.

Bob Wettermann: Making the ‘Best’ of His Career

04/19/2023 | Nolan Johnson, I-Connect007
Bob Wetterman started his career in the semiconductor industry, but after a series of industry and economic changes, he tapped into that entrepreneurial spirit. For more than 20 years, he has been leading and developing BEST, Inc., a shop customizing in PCB rework and repair. In this interview, Bob reflects on his long career, and we meet Nash Bell, who will be leading BEST through its next phase.

The Need for Real-time Measurements on the Factory Floor

04/05/2023 | Barry Matties, I-Connect007
During SMTA Dallas Expo 2023, Barry Matties spoke with Morgan Miller, field application engineer at Insituware, about the need for real-time measurement capabilities, like the Vision MARK-1 device offers, which is powered by analytical sensors, machine learning, and cloud-based technology to bring materials control solutions right to the factory floor.

Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.