Forensics Uncovers Elusive Defects & Saves PCB Designs


Reading time ( words)

Can something as tiny as a microCSP-packaged device, as shown in Figure 1, be the cause of a PCB design defect or its complete failure? As you can see, this tiny package is as small, or even a bit smaller than the letter “L” in the word “Liberty” that is printed on the dime.

That’s only part of the story. The other part is you and your CM or EMS provider have no clue that’s where the defect lies, and worse, even if you guessed that the micro-CSP-packaged device posed the problem, you couldn’t find it because it is so elusive and so extraordinarily small.

Today, OEMs are increasingly moving toward smaller, more portable products and systems. Most of those used to be larger, desktop models a few years ago. However, with recent advances in electronics technologies, various markets are demanding smaller products and systems with the same or greater functionality than their larger ancestors.

As a result, semiconductor and electronics suppliers are constantly shrinking their products and adding more functionality to comply with market demands. For CMs and EMS providers, it means moving toward smaller form-factor boards populated with such advanced, but smaller component and device packaging as micro-BGAs, micro-CSPs, package-on-package (PoP), 01005s, and others.

Finding the Defect and Saving the Design

Conventional inspection methodologies on the assembly floor include using advanced X-ray and automatic optical inspection or AOI and continue to be at the forefront for most PCB designs.

Yet, because these advanced inspection and analysis systems aren’t able to deliver, a newer form of inspection is making its presence known in our industry. We call the new form forensic analysis.

Read the full article here.


Editor's Note: This article originally appeared in the April 2014 issue of SMT Magazine.

Share

Print


Suggested Items

KYZEN’s Tom Forsythe: The Effects of COVID-19

05/15/2020 | Barry Matties, I-Connect007
On May 7, Barry Matties and Tom Forsythe, executive vice president at KYZEN, discussed the effects of COVID-19. During the conversation, Forsythe addressed KYZEN’s strategy to keep the staff and employees healthy as the foremost concern. He also detailed recent changes in interacting with customers and his take on what will be the new long-term changes in how the company does business versus short-term accommodations.

Koh Young Europe Celebrates 16,000 Installed Systems

11/25/2019 | I-Connect007 Editorial Team
During productronica 2019, the I-Connect007 Editorial Team met with some of the industry's top executives, managers, and engineers. In this video interview, Editor Nolan Johnson and Harald Eppinger, managing director at Koh Young Europe, discuss the company’s milestone of 16,000 installed systems, the Zenith Alpha, and market trends in AOI systems.

Maximising Performance and Reliability of Automotive Electronics With Conformal Coatings

11/20/2019 | Phil Kinner, Electrolube
While the value of the electronic systems in a modern vehicle typically exceeds 20% of the total vehicle cost, many estimate that this value will exceed 35% within the next five years. With the increased adoption of electronic vehicles and the development of the internet of things (IoT)—which has brought us driverless cars like those being tested by Google in California and BMW on the roads of Bavaria—the future of this industry is starkly different from that of the 1970s when electronic fuel injection systems were first introduced to mainstream production.



Copyright © 2020 I-Connect007. All rights reserved.