-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
The Invisible Enemy
December 31, 1969 |Estimated reading time: 3 minutes
Fumes and vapors released during hand soldering with lead-free solder may pose a greater risk to employees than ever before. Installing an effective fume filtration system is the way to lessen the risks.
By Karl Schuepstuhl
A driving force behind lead-free solder is the desire by government and industry to lower the negative impact of electronics on human health and the environment. Researchers are discovering that lead-free solders could be more harmful than conventional ones during the hand soldering process.
The composition of lead-free solders, their stronger fluxes and higher processing temperatures mean that manufacturers must not overlook the impact that going lead-free will have on the environment, specifically the added importance that effective fume filtration takes on in achieving these goals.
Many solders contain a rosin-based flux that produces colophony when heated, containing harmful constituents ranging from acetone to carbon monoxide, and is recognized as a common causes of occupational asthma. Non-rosin solders contain alcohols and acids that can be even more dangerous to health than colophony.
The UK's1 Health and Safety Executive (HSE) has issued strict guidelines for resin acids present in rosin-based fluxes. Manufacturers in the UK must ensure their employees are not exposed to more than 0.05 mg/m3 per hour over an eight-hour period. If exceeded, a company must stop using the offending chemicals or install an effective fume filtration system.
Research has shown that the fumes and vapors released by lead-free solders can be more dangerous to workers' health than lead-based formula, especially on the benchtop.
A typical lead-free solder wire may contain 2 to 3 percent flux by weight, similar to conventional solders. However, the flux content may have to be more aggressive to achieve the same degree of solder wetting, which yields stronger, more potentially harmful chemicals. The solders also have a higher melting point than tin-lead, meaning solder fluxes will be exposed to higher temperatures than ever before.
A further issue with lead-free solders is that their peak reflow dwell times can be longer, so there is more chance of flux degradation occurring and more chemicals and materials becoming airborne.
These three factors make fume filtration necessary during hand soldering. Fume filtration actually produces cost savings in terms of increased operator productivity, reduced staff turnover and controlled healthcare costs. But lead-free increases the need for monitoring and improving internal air quality, driving a demand for fume extraction systems that are powerful, highly efficient, portable and cost-effective.
The visible smoke produced during soldering often is the least likely substance to cause harm, as the human body can filter much of it. It is the smaller particulates that pose the most potential risk.
The best way to eliminate hazardous particulates is to use a fume filtration process that removes air from the operator's breathing zone and filters it before releasing it back into the room.
Most fume filtration units consist of a pump, collection device and filter, but vary widely in capability. A powerful pump is important, but not on its own. A good pump with a poor filter means that contaminated air is simply moved around, while a poor pump but good filter results in a low operating pressure that fails to collect fumes efficiently. A rated suction force of 850 Pa provides adequate airflow and fume collection. Arm extraction systems remove not only solder fumes, but also vapors from solvents and adhesives.
Cheap units, such as tabletop fans with a basic carbon filter, cannot remove the smaller, more dangerous particles. Even opting for HEPA filters does not guarantee success, as various grades of paper can differ in effectiveness by a factor of up to 100.
When choosing a filter, make certain any effectiveness ratings are given with a particle size. For example, a filter that claims to be 99.997 percent effective may only do so for particles of 1 µm and above. A chemically treated gas filter also is useful after the pre-filter and HEPA filter stages.
Besides efficient pumping, collection and filtration, the latest generation of fume filtration units can be moved easily between locations. These units only require an electrical socket, targeting manufacturers with a flexible layout to their workflows.
Reference
- Britain's Health and Safety Commission (HSC) and the Health and Safety Executive (HSE) are responsible for the regulation of almost all risks to health and safety from work activity in Great Britain.
Karl Schuepstuhl, global product manager — fume extraction, may be contacted at OK International, Impell Brand, 50-A Satellite Blvd., Suwanee, GA 30024, (770) 614-7701; E-mail: kschuepstuhl@okinternational.com; Website: http://www.okinternational.com