Ersa to Exhibit at the SMTA Upper Midwest Expo


Reading time ( words)

Kurtz Ersa North America, a leading supplier of electronics production equipment, is pleased to announce that it will exhibit at the SMTA Upper Midwest Expo & Tech Forum, scheduled to take place Thursday, June 25, 2015 at the Marriott Minneapolis Southwest. Company representatives will discuss the complete Ersa product line, with a focus on the new Smartflow 2020 selective soldering system.

In all process steps the automatic Smartflow system uses the same successful and proven Ersa selective soldering technology as the large Ersa VERSAFLOW systems without compromising quality and accuracy. The Smartflow 2020 selective soldering system requires less than 3 m² of space, thus fitting optimally into cell production environments.

With the Smartflow, ERSA finally closes the gap from its high end Versaflow platform to an entry level machine. Due to its universal pallet fastening, the Smartflow can handle PCB sizes of up to 508 x 508 mm [20” x 20”].

For more information about Kurtz Ersa North America, visit www.ersa.com.

Share

Print


Suggested Items

This Month in SMT007 Magazine: How Engineers Can Use SPI Tools for Verification

05/06/2020 | Nolan Johnson, I-Connect007
Koh Young’s Ray Welch and Brent Fischthal detail how engineers can work with SPI tools to verify how small they can go in component size with their solder paste application, and how the company’s SPI equipment is helping not only to verify but also to help drive the development collaboration between solder paste and stencil printer manufacturers, and inspection tools and software.

The Foundation of Industry 4.0

04/15/2020 | Oren Manor, Mentor, a Siemens business
When adopting IoT solutions, start with three main considerations. First, assess which parts of the production cycle can be automated and/or monitored most effectively with IoT devices connected to an analytics platform. IoT technology should be matched to the production cycle of your operation.

Upgrading to a Digital Line

01/15/2020 | Nolan Johnson, I-Connect007
Ridhi Kantelal of Arch Systems breaks down what fabricators considering bringing in digitalization and upgrading their lines should know, and why they may see the most benefit from focusing on the data engineering aspect rather than the actual retrofitting of their systems.



Copyright © 2020 I-Connect007. All rights reserved.