FCT, Fine-Line Stencil Expand Market Presence in Mexico


Reading time ( words)

FCT Companies, a leading chemistry, electronic stencil and specialty manufacturing business, announces the official opening of its new state-of-the-art facility in Guadalajara, Mexico.  While FCT has long had a significant presence in Mexico through sales, service and distribution, the company’s Fine-Line Stencil operation in Guadalajara marks its first manufacturing site in the region and is a noteworthy addition to the broad FCT offering.

The leading-edge, 13,000 square foot FCT Mexico facility will provide multiple electronics assembly products and services including precision laser cut stencils from FCT’s Fine-Line Stencil division, as well as  the company’s revolutionary stencil coating, NanoSlic™.  With its customer base in Mexico expanding quickly, establishing regional product supply will enable FCT to better serve its customers with local support and fast delivery.

“FCT’s investment in this facility now offers customers in the Mexican region more immediate access to our advanced products and processes,” notes Brent Nolan, Vice-President of FCT Companies.  “FCT’s understanding of material behavior and stencil performance for today’s miniaturized assemblies is exceptional and our approach is holistic.  Integrating stencil manufacturing, transfer efficiency-enhancing stencil coatings and next-generation solder materials provides a comprehensive solution for today’s increasingly challenging printing applications.”

Precision stencil manufacturing at the site is managed by Fine-Line Stencil, which is wholly owned by FCT and already firmly established as the leading stencil provider in North America with multiple locations throughout the United States.  This new facility will offer a variety of stencil products including stainless steel mesh-mounted stencils, VectorGuard® High-Tension foils, fine-grain stainless steel stencils and nickel blanks. All are also available with the FCT-developed NanoSlic coating, proven to improve solder paste transfer efficiency and extend the number of prints between cleaning cycles.   NanoSlic is changing conventional perceptions of Area Ratio rules by enabling ample material volumes to be printed through highly miniaturized aperture dimensions.

“The introduction of NanoSlic has completely changed the stencil business and has, in fact, contributed significantly to Fine-Line’s notable growth in recent years,” says Nolan.   “Greater than one third of the stencils that leave our Memphis, Tennessee facility are coated with NanoSlic.  We continue to see this percentage increasing as more of our facilities integrate NanoSlic coating equipment – a capability the Mexico facility now offers.”

NanoSlic is a hydrophobic (repels water), oleophobic (repels oil), durable, permanent coating that is applied via a proprietary application technique to both the underside of the stencil and inside the aperture walls.  The coating helps improve solder paste transfer efficiency by as much as 40% on challenging area ratios and increases the number of prints before required understencil cleaning.  In addition to its proven performance advantage for stencils, NanoSlic is also electrically insulating and is used successfully as a coating to safeguard assembled printed circuit boards against water and corrosion.

Commenting on the significance of this expansion, FCT Mexico Sales Director Sergio Juarez says, “Customers in Mexico are very excited about the addition of FCT’s full-service technical center in this region.  Not only can they source product more quickly, but they will also have the opportunity to participate in process technology days, leverage the expertise of our team and utilize the facility for development projects. It’s a win-win.”

FCT’s Guadalajara, Mexico facility is fully operational and is producing advanced stencils for customers in the region.  For more information, contact Sergio Juarez via e-mail (sjuarez@fctassembly.com) or by phone on +52 (33) 3164-0599.              

About FCT Companies

FCT Companies is a group of businesses that serve the electronics and surface protection markets.   With innovation at its core, FCT Companies has developed some of the most pioneering new products and processes for the markets it serves and is continually pushing past boundaries to develop new approaches to age-old challenges.  With multiple locations in North America, FCT Companies is positioned to offer the strength of broad resources and the convenience of local access. 

Share

Print


Suggested Items

Solder Paste Printing From the Stencil’s Perspective

02/19/2020 | I-Connect007 Editorial Team
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

Solder in PCBA: Can’t Live Without It... or Can We?

02/17/2020 | Joe Fjelstad, Verdant Electronics
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.



Copyright © 2020 I-Connect007. All rights reserved.