Dymax Releases "Dispensing Light-Curable Materials" White Paper


Reading time ( words)

Light-curable adhesives rapidly bond glass, metal, and plastic by curing upon exposure to energy of the proper wavelength. Many factors can affect the controlled dispensing and processing of these materials. Dymax Corporation’s new white paper “Dispensing Light-Curable Materials: Process Controls & Troubleshooting” discusses substrate compatibility, temperature and viscosity, and how to set up a dispense system. It also covers syringe dispensing challenges, air bubbles and cavitation in syringes, using cartridges and pressure pots, and preventive maintenance.

In manufacturing, process controls are used to ensure that products are made to the highest standard possible. When effective procedures are laid out for each step in the manufacturing process, it's much easier to reduce the risk of damage, failure, and loss.  Register to download the paper and learn how to properly set up and maintain your dispensing system.

About Dymax Corporation

Dymax Corporation develops innovative oligomer, adhesive, coating, dispensing, and light-curing systems for applications in a wide range of markets.  The company’s products are perfectly matched to work seamlessly with each other, providing design engineers with tools to dramatically improve manufacturing efficiency and reduce costs.  Major markets include aerospace, appliance, automotive, electronics, industrial, medical device, and metal finishing.

For additional information, visit www.dymax.com or contact Dymax Application Engineering at info@dymax.com or 860-482-1010.

Share

Print


Suggested Items

Book Excerpt: Cornerstone of Smart Manufacturing—The Convergence of IT and OT

06/10/2020 | I-Connect007 Editorial Team
The following is an excerpt from Chapter 2 of the I-Connect007 eBook The Printed Circuit Assembler’s Guide to… Advanced Manufacturing in the Digital Age, written by Oren Manor of Siemens, a Siemens Business.

Ross Berntson: Indium Corporation’s Pledge for Safe Resumption Post-COVID

05/22/2020 | Nolan Johnson, I-Connect007
On May 20, Nolan Johnson spoke with Ross Berntson, Indium Corporation’s president and COO, about the company’s response to the COVID-19 outbreak. Berntson details the company's work with a consortium of manufacturing businesses in central New York state, developing a manufacturing pledge to keep people safe and keep factories running. Indium Corporation has been one of the frontrunners in formalizing such procedures and in sharing lessons learned among all the participating companies.

IPC’s Shawn Dubravac: COVID-19 Outbreak Accelerates Industry Shifts Already Under Way

05/21/2020 | Barry Matties, I-Connect007
On May 19, Barry Matties spoke with Shawn Dubravac, chief economist for IPC. While discussing other topics, Matties asked for Dubravac’s perspective on shifts in the market, who observed that the recessionary trend might be behind us; the markets are already showing recovery. Still, it could take a year or so to fully recover.



Copyright © 2020 I-Connect007. All rights reserved.