Nordson EFD Introduces New xQR41 MicroDot Needle Valve


Reading time ( words)

Nordson EFD, a Nordson company, the world’s leading precision fluid dispensing systems manufacturer, introduces the xQR41 Series MicroDot needle valve. The valve features a 60% smaller form factor than standard valves, an exchangeable modular design for greater customization and process control, and a Quick Release (QR) clasp that allows easy removal of the fluid body to replace wetted parts in seconds. The new valve expands manufacturing opportunities for multiple applications and industries, especially those related to wireless devices, sensors, mobile phones, and other high-end electronics.

The xQR41 valve’s small profile of 66 mm length x 23.7 mm diameter (2.60" x 0.93") enables multiple valves to be mounted closer together for greater output per batch, increasing production throughput. Ideal for automated assembly processes, the needle valve can dispense in tighter spaces and at more complex angles. Weighing only 141.4 g (5.0 oz), the xQR41 valve reduces the tooling payload. This not only means faster actuator arm movement and improved positioning stability, but also reduced tabletop automation (TTA) motor and belt wear. The xQR41’s small form factor also results in a smaller wetted path, resulting in less retained fluid volume, which minimizes fluid waste. It can be fed from a variety of reservoirs, syringe barrels, external cartridges, or tanks.

The valve's unique QR clasp secures the fluid body to the air actuator and can be removed with a turn of a thumbscrew – no tools required. No longer is it necessary to remove the entire actuator or valve assembly from mounting fixtures. Full change-outs take seconds, not minutes. This is especially important in applications with fluids that have a curing time where the wetted part must be removed as quickly as possible and returned to operation.

The pneumatically-operated, adjustable valve applies precise micro-deposits as small as 150 µm (0.15 mm) (0.006”) of low- to high-viscosity fluids onto a substrate. The xQR41’s exchangeable modular design can be configured with stroke adjustable or non-adjustable cap, BackPack™ valve actuator, low-profile mounting block, and 90° air and fluid inlet fittings. The fluid body can be aligned and locked at 360° intervals to accommodate mounting, positioning, and fluid inlet alignment needs. It can be installed on many automation platforms.

“With rapid interchangeability, a smaller form factor, and infinite configurability, Nordson EFD’s new xQR41 MicroDot needle valve not only offers new possibilities for fluid dispensing, but it also saves time and costs and increases productivity,” said Claude Bergeron, product manager, Nordson EFD.

About Nordson EFD

Nordson EFD designs and manufactures precision fluid dispensing systems for bench top assembly processes and automated assembly lines. By enabling manufacturers to apply the same amount of adhesive, lubricant or other assembly fluid to every part, every time, EFD dispensing systems are helping companies in a wide variety of industries increase throughput, improve quality, and lower their production costs. Other fluid management capabilities include high-quality syringe barrels and cartridges for packaging one- and two-component materials, along with a wide variety of fittings, couplers and connectors for controlling fluid flow in medical, biopharmaceutical and industrial environments. The company is also a leading formulator of specialty solder pastes for dispensing and printing applications in the electronics industry.

RELATED VIDEO: 


For more information visit Nordson EFD on the web at nordsonefd.com.

View high resolution photo.  Download Datasheet.

About Nordson Corporation

Nordson engineers, manufactures and markets differentiated products and systems used for dispensing and processing adhesives, coatings, polymers, sealants and biomaterials; and for managing fluids, testing and inspecting for quality, treating surfaces and curing. These products are supported with extensive application expertise and direct global sales and service. We serve a wide variety of consumer non-durable, consumer durable and technology end markets including packaging, nonwovens, electronics, medical, appliances, energy, transportation, building and construction, and general product assembly and finishing. Founded in 1954 and headquartered in Westlake, Ohio, the company has operations and support offices in more than 30 countries. Visit Nordson on the web at www.nordson.com.

Share

Print


Suggested Items

IPC’s Shawn Dubravac: COVID-19 Outbreak Accelerates Industry Shifts Already Under Way

05/21/2020 | Barry Matties, I-Connect007
On May 19, Barry Matties spoke with Shawn Dubravac, chief economist for IPC. While discussing other topics, Matties asked for Dubravac’s perspective on shifts in the market, who observed that the recessionary trend might be behind us; the markets are already showing recovery. Still, it could take a year or so to fully recover.

What You Need to Know About the Digital Factory

01/03/2020 | Barry Matties, Publisher, I-Connect007
Barry Matties spoke with Oren Manor, director of business development for Mentor, A Siemens Business, during productronica about the many benefits of a digital factory and what’s keeping companies from becoming one. Oren also gives examples of big data analytics along with the move to a lot size of one.

SEMI Discusses Benefits of SMT-ELS Protocol

12/13/2019 | Nolan Johnson, PCB007
Editor Nolan Johnson and Tom Salmon discuss the SMT- ELS protocol, which is being developed collaboratively as a replacement for SMEMA. Salmon overviews the technology involved and industry acceptance so far. He also explains SEMI’s focus on information and control standards, including the newest solution which allows companies to perform switchovers much faster, thanks to the TCP/IP protocol. This platform also works with traditional PLC systems, shrinking development time from one month to several days.



Copyright © 2020 I-Connect007. All rights reserved.