-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Parylene and Wearable Devices
July 2, 2015 | Sean Horn, Vice President, Diamond-MT Inc.Estimated reading time: 3 minutes
Wearables are no longer emerging technology—they are here. Whether a wearable item is a medical device like an insulin pump, a smart watch or even a finely woven piece of smart fabric, they all have one basic fact in common. All of them contain technologies that need protection from the outside world and, in just about every case, Parylene is the most appropriate choice for protection.
Parylene is the most different of all conformal coating compounds. While others deposit as a liquid, Parylene deposits as a vapor. Most coatings need to applied in thicknesses measured in mils, while Parylene is effective at thicknesses measured in microns. Finally, many conformal coatings are especially good at one or two things while Parylene is great at just about everything.
The wearable challenge
The life of a wearable device is harder than it might seem. After all, it goes everywhere that its wearer goes. At first glance, these conditions might not seem that extreme. After all, the places that we go usually don't harm or kill us. However, from the perspective of a device, consider the many challenges that it faces:
- A wearable device could be exposed to summer in Phoenix (115°C) and winter in Minneapolis (-25°C), giving it a 140° range.
- Wearables need to be small and light enough to be comfortably worn. Generally, they also need smooth surfaces for comfort, especially where they are to touch the skin.
- A user with an outdoor-based job could easily expose their device to eight to 12 hours of direct sunlight—filled with UV rays.
- Wearable devices get exposed to corrosive spray when they are taken to the beach or on a boat.
- Household cleaning chemicals—that are likely to end up landing on a wearable device—contain harsh compounds and powerful solvents.
- Between office equipment, wireless personal devices, and high-tension power lines, wearable devices are constantly bombarded with RF and EMF signals of varying strength.
- Wearable devices are in a constant state of vibration and motion and are at risk of abrasions and impacts at any time.
- The human body itself exudes gases, liquids and maintains a constant temperature that is almost 30°F above room temperature.
The Parylene solution
Parylene offers a solution to just about every challenge posed by a wearable device. Point by point, here is what Parylene brings to the table:
- Parylene withstands temperatures as high as 80°C with no degradation and can go as low as -200°C. At body temperature, it can last forever.
- Because its coating is so thin, Parylene adds almost no perceptible weight or size increase to the item that it coats. It is comfortable and non-irritating against the skin (or, for that matter, inside the body) thanks to its high level of biocompatibility and its dry film lubricating capability.
- Parylene resists water, corrosives, chemicals and solvents, making it a great coating in real world applications.
- Of all coatings, Parylene is one of the most effective dielectrics in a thin coat, blocking EMF and RF interference.
- While it doesn't have the cushioning properties of a thick coat of silicone, Parylene is tough and able to withstand impact and abrasion.
- Parylene forms a truly conformal coat that also blocks gasses from entering the coated item.
Parylene and two wearable challenges
Wearables can pose two unique challenges, and Parylene can handle both of them. First, many wearables carry sensors that report back on either what they are doing or what the person wearing them is doing. Microelectronic mechanical sensors, especially, are fine and finicky items that require protection, but not so much of it that it blocks their proper functioning. Parylene's ability to conformally coat even the smallest and most complicated item makes it the best choice for protecting wearable MEMS.
The dielectric properties of Parylene are usually desirable, but if a wearable device needs to take measurements of the world around it (or of its wearer), those properties could prevent the device from functioning. Luckily, wearable devices can be masked before coating. The masking can prevent the Parylene from depositing on the sensors, allowing them to properly function while the rest of the device still gets the benefits of being conformally coated.
To learn more about how Parylene, as an enabling technology, can significantly increase the performance of sensors as they become increasingly integrated into our daily lives, click here.
Suggested Items
ViTrox Showcases Revolutionary Industry 4.0 Full Turnkey SMT PCBA Inspection Solutions at Productronica Germany 2023
09/13/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is thrilled to announce that we will be participating in Productronica Germany, at Booth #A2.504, from 14th to 17th November 2023, in International Congress Center München (ICM), Munich, Germany.
Dymax 9771 Conformal Coating Receives MIL-I-46058C Certification for PCBA
09/12/2023 | DymaxDymax, a leading manufacturer of light-curing materials and equipment, is pleased to announce that their ground-breaking AR conformal coating, 9771, has completed the rigorous qualification testing for Military Specification MIL-I-46058C. This UL94V0 and UL746E recognized dual-cure coating has also been approved to the IPC-CC-830B standard and fully complies with RoHS2 Directives 2015/863/EU.
Embark on an Innovative Journey: Mexico Technology Day 2023 by ViTrox & SMTo
09/12/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is thrilled to announce that we will be partnering with our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering SA de CV, to bring to you our Mexico Technology Day 2023.
Austin American Technology Creates Buzz with Justin Worden’s 1st SMTA Presentation
09/07/2023 | Austin American Technology (AAT)Justin Worden, the dynamic Global Sales and Marketing Director at Austin American Technology (AAT), is no stranger to creating a buzz in the electronics industry.
Anda Technologies to Showcase State-of-the-Art Plasma, Dispensing and Coating Systems at SMTA International
09/06/2023 | Anda Technologies USA, Inc.Anda Technologies, a leading provider of fluid application and custom automated manufacturing equipment, will exhibit in Booth #916 at the upcoming SMTA International exhibition. The event will be held at the Minneapolis Convention Center in Minnesota from Oct. 10-11, 2023.