Ascentech to Exhibit at SMTA Ohio Expo & Tech Forum


Reading time ( words)

Ascentech LLC will exhibit and demonstrate advanced Optilia and Gensonic test and process optimization instruments and solutions at the upcoming Ohio SMTA Chapter Expo & Technical Forum on July 16, 2015 at the Doubletree Hotel Cleveland South in Independence, OH.

Products on display will include the Optilia BGA Inspection Scope and the Optilia High Definition Camera Inspection System, the award-winning GENSONIC Ultra-Sonic Stencil Cleaner, and Gensonic Solder Saver solder/Dross separation tool. Ascentech, LLC is the North American distributor for visual Inspection Instrument manufacturer Optilia Instruments AB, as well as GEN3 Systems Ltd.

Optilia offers obstruction‐free, fatigue‐free High‐definition benchtop inspection for PCB assembly, and real‐time BGA inspection solutions.

The Solder Saver is a hand held, compact system for separating Dross from good solder. The unit easily reduces hardened dross material to oxide powder making it possible to remove the dross oxide waste from the solder pot, leaving valuable solder in the pot.

The Gensonic is a manually-operated, ultrasonic transducer unit for cleaning stencils used in printing solder pastes and adhesives. It can be used either directly on the printer or at a separate cleaning station.

About Ascentech, LLC

Ascentech, LLC is the North American Distributor for Optilia Instruments AB, as well as GEN3 Systems, and also supplies the industry with other testing and process optimization solutions for electronics manufacturing. To learn more, visit www.ascentechllc.com.  For sales and technical information, contact Randy Allinson, Ascentech, 127 Goose Hill Rd., Chester, CT, 06412: Tel 860-526-8903, e-mail rallinson@snet.net.

Share

Print


Suggested Items

Solder Paste Printing From the Stencil’s Perspective

02/19/2020 | I-Connect007 Editorial Team
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.

LPKF on Stencils and Depaneling

02/11/2020 | I-Connect007 Editorial Team
Stephan Schmidt and Mirela Orlowski of LPKF Laser & Electronics North America discuss laser technology in cutting stencils and depaneling circuit boards as a factor in shrinking component sizes and why few people in the industry realize how much of an impact the stencil can have on the manufacturing line.

Clean vs. No-clean: A Generational Difference

12/24/2019 | Barry Matties, I-Connect007
Tom Forsythe, executive VP of KYZEN, discusses what readers should know about cleaning as reliability expectations continue to increase. He also explains what is driving the new interest in cleaning and why engineers from the no-clean generation may not even realize they need to learn more about cleaning.



Copyright © 2020 I-Connect007. All rights reserved.