Dymax Streamlines Product Selection


Reading time ( words)

Dymax Corporation has released a new gasketing materials selector guide that provides useful product information and simplifies the product selection process. Light-curable form-in-place, cure-in-place gasketing materials are used in automotive, mobile device, lighting, electrical device, HVAC, energy, and industrial hardware applications. They’re designed for automated dispensing to support high-volume production and consistency in bead profile for single-wall, flat-surface, or channel configurations.

Dymax gasketing materials act as a barrier to prevent absorption or penetration of air, dust, noise, liquids, gaseous substances, or dirt. The gaskets conform to complex and intricate channels, on both vertical and horizontal surfaces, with thixotropic formulations, and flow into channels with Newtonian formulations.  This technology accommodates engineering changes without high tooling investment, helping to reduce costs, and turning problems like production throughput into non-issues. Dymax one-part, 100% solids gasket resins are silicone free and replace technologies that contain hazardous ingredients, produce waste, and require higher amounts of energy to process.

Dymax form-in-place (FIP)/cure-in-place (CIP) gaskets cure completely in seconds - even to 1/4 inch thick beads - with good compression set. 

About Dymax

Dymax Corporation develops innovative oligomer, adhesive, coating, dispensing, and light-curing systems for applications in a wide range of markets. The company’s products are perfectly matched to work seamlessly with each other, providing design engineers with tools to dramatically improve manufacturing efficiency and reduce costs. Major markets include aerospace, appliance, automotive, electronics, industrial, medical device, and metal finishing.

For additional information, click here.

Share

Print


Suggested Items

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

IPC Electronics Materials Forum 2019

10/16/2019 | IPC
IPC will be holding its Electronics Materials Forum 2019 from November 5–7, 2019, in Bloomington, Minnesota. The Electronics Materials Forum is a new technical conference focused on developments in materials and processes associated with advanced electronics assembly and manufacturing.

Meet Chris Ellis, SMT007 Columnist

09/18/2019 | I-Connect007
Meet Chris Ellis, one of our newest SMT007 columnists! In his columns, Ellis addresses common problems that Manncorp customers have had with the in-house conversion process, and shares solutions that have worked in the past.



Copyright © 2020 I-Connect007. All rights reserved.