-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC-A-610: What's New With Rev F?
July 22, 2015 | Leo Lambert, EPTACEstimated reading time: 2 minutes
IPC generates many specifications related to printed circuit board fabrication, assembly processes and inspection criteria. The intent of the following article is to describe how the documents come about and how they are generated by providing an overview of the latest changes in IPC-A-610, Acceptability of Electronic Assemblies, hereafter identified as 610. Additionally, there are online courses available that will go through each one of these changes in details.
Background
Why are new revisions created? Can’t IPC just issue updates to the existing revision? Who defines what the changes are going to be and who approves of those changes? Why can’t they make changes for all the new technologies available? And the best question of all: Why does my product have some conditions that are not covered in the documents and specifications?
Taking just one document, 610, and trying to answer those questions will hopefully provide a window for customers, users, and manufacturers to see where these documents come from and how they are put together to upgrade the products being made, and hopefully improve the quality of those products.
Every five years, a new revision is created for all the specifications from IPC. This was mandated for all ANSI approved documents. Since many IPC documents were ANSI-approved, they had to be reviewed and updated on a regular basis, in our case five years. There are multitudes of implications with the release of new revisions. They include, but are not limited to: contract negotiations, purchasing of new specifications, and development of new certification training programs to cover the requirements of those documents for the trainers and the specialist. This is all accomplished by attending the semiannual meetings of IPC and participating in the task group meetings, where all the new information is presented, all the comments are reviewed to correct deficiencies in the existing revision, and all conflicting information is reviewed to verify that complementary documents are in agreement for criteria information.
Once all the information is reviewed and accepted by the committee, a draft is sent to the IPC community for review and comment. Once again there is a review and discussion on the comments, and subsequently another draft is created and the process repeats itself until all the comments are resolved and a new document is published.
Creating updates to the documents is also handled in the same fashion, and since the comments are considered critical, the review period is shorten to enhance the speed to which the approval cycle is made and then the documents are published for the user community. This is a relatively short process as it only addresses critical issues to the main body of the document.
So, what defines the changes? First, comments from the user community as found on the comment sheet in the back of every IPC specification. Second, submittal from the component manufacturers on new components being introduced for new technology applications. Finally, corrections needed from editorial and technical mishaps in the existing documents.
To read this entire article, which appeared in the June 2015 issue of The PCB Design Magazine, click here.
Suggested Items
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Real Time with... IPC APEX EXPO 2024: A Conversation with IPC's CEO: New Venue, Sustainability, and More
04/23/2024 | Real Time with...IPC APEX EXPOBarry Matties hosts Dr. John W. Mitchell, CEO of IPC, on the final day of IPC APEX EXPO 2024. They discuss the new venue in Anaheim and broach a range of topics, from traffic and booth experiences to workforce development, sustainability, and the CHIPS Act. And they offer advice for newcomers as IPC looks forward to an even better show experience next year.
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.