TRI Brings Smart Inspection and Testing to Productronica India 2015


Reading time ( words)

Test Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry will join Productronica India 2015 in New Delhi's Pragati Maidan to showcase its award winning PCBA test and inspection portfolio featuring the latest 3D AOI, 3D SPI, 3D AXI with CT and iconic electrical testing products. Come meet us at booth 1218 from September 9 to September 11, 2015.

TRI's 2015 portfolio includes new TR7007Q stop-and-go SPI system designed for maximum accuracy with great cost-performance. Also launching in 2015 is a unique CT upgrade for TRI's 3D AXI systems, bringing 3D CT inspection to our award winning x-ray inspection series. The demoed inspection and testing range includes high speed TR7500 SIII 3D AOI, the economical TR7502 DT AOI and TRI's acclaimed TR518 SII MDA tester.

Discover how TRI's complete range of PCBA test solutions works together to bring you maximum value in production line and minimize production costs. Ranging from SPI, AOI, AXI, MDA and ICT, TRI's systems are designed to interoperate with other manufacturing equipment to minimize down times, optimize production quality and reduce operator work load. 

Visit us at T&R India booth 1218 from September 9 to September 11, 2015 to find out how much value our solutions can bring to your production line

About TRI

TRI offers the most robust product portfolio in the industry for Automatic Test and Inspection solutions. From Solder Paste Inspection (SPI), Automated Optical Inspection (AOI), and 3D Automated X-ray Inspection (AXI) systems to Manufacturing Defect Analyzers (MDAs) and In-Circuit Test equipment, TRI provides the most cost-effective solutions to meet a comprehensive range of manufacturing Test and Inspection requirements. Learn more at http://www.tri.com.tw. For sales and service information, contact us at marketing@tri.com.tw or call +886-2-2832-8918.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.