Seika Machinery Debuts MALCOM VDM-2 Video Capture System


Reading time ( words)

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, introduces the MALCOM VDM-2 Video Capture System. Used in conjunction with MALCOM Reflow Simulators, the VDM-2 camera system captures video of the simulated reflow process.

The VDM-2 includes a video mixer that overlays the temperature/time/profile data over the video to make it easy to track important points during reflow. It receives real-time, temperature, wettability, profile and other data from MALCOM Reflow Simulators compliant with the VDM-2. Data is overlaid onto the video feeds taken by the video camera(s) in real-time.

The built-in scale function measures the displayed object. Up to two CCD cameras can be connected, enabling the VDM-2 to display up to two video feeds at the same time. This makes it possible to observe samples from multiple angles.

About Seika Machinery, Inc.

Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

Share

Print


Suggested Items

Part 12 of Siemens’ Digital Twin Webinar Series: MES and Enterprise Systems

11/25/2020 | I-Connect007 Editorial Team
I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing” with Siemens' Jay Gorajia. To conclude the series, in Part 12, Gorajia discusses, “Integrating Valor Solutions as Part of MES and Enterprise Systems."

Part 11 of Siemens’ Digital Twin Webinar Series: Data-Driven Manufacturing

11/18/2020 | I-Connect007 Editorial Team
I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing” with Siemens' Jay Gorajia. In Part 11, Gorajia discusses, “Data-Driven Manufacturing: Making Big Data Into Smart Data.”

Part 9 of Siemens’ Digital Twin Webinar Series: Intelligent Data Acquisition and Normalization

11/04/2020 | I-Connect007 Editorial Team
I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing” with Siemens' Jay Gorajia. In Part 9, Gorajia’s topic is “Intelligent Data Acquisition and Normalization.” He asks, “With the considerable investment in automation of the PCB assembly process, why is it a challenge to get data from the production line?”



Copyright © 2020 I-Connect007. All rights reserved.