ASM COO to Keynote SMART Group’s 2015 European Conference


Reading time ( words)

SMART Group, Europe’s largest technical trade association focusing on surface mount and related technologies, announces that its European Conference Management Session will be headlined with a keynote from Günter Schindler COO of ASM Assembly Systems.

The speech will focus on how the company sees Industry 4.0 and how to get on the path to the Smart Factory of the future.

This Management Session will run on the second day of the conference which will take place from September 22-23, 2015, at the National Physical Laboratory in Teddington, London. The NPL is an internationally renowned centre of excellence and technology.

To book your place at this strategically important business event, contact Paula Muller at +44 (0)208 4322741, info@smartgroup.org or visit the online conference page here.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.

Joe Fjelstad Breaks Down His Occam Process

03/04/2020 | I-Connect007 Editorial Team
Joe Fjelstad recently met with the I-Connect007 Editorial Team to discuss the potential benefits of his Occam process for solderless assembly. This technique allows assembly of the PCB without the risks associated with traditional surface-mount processes, such as solder joint failure. Has the time come for the industry to embrace Occam?



Copyright © 2020 I-Connect007. All rights reserved.