Discover 2D/3D Interface Analysis Software from Akrometrix LLC at SMTAI


Reading time ( words)

Akrometrix LLC, the leader in elevated temperature surface characterization, will exhibit in Booth #134 at SMTA International, scheduled to take place Sep. 29 - 30, 2015 at the Donald Stephens Convention Center in Rosemont, IL. Company representatives will demonstrate the Interface Analysis software that allows high level and in-depth review of the attachment interface between two surfaces that warp during a microelectronics production reflow profile.

Surface-mount components may warp during the reflow process, as well as the associated land area. This warpage between components and the land area can contribute to defects such as Head-on-Pillow, shorts and opens. Fully understanding the critical interface between surfaces is more important than ever.

The Akrometrix Interface Analysis software enables 3D, 2D and statistical review of the complete interface at each temperature point during reflow and for the combined data set. Data to be analyzed can be collected with any of the 200+ TherMoiré systems in use throughout the worldwide electronics supply chain today. Introducing unique features such as Pass/Warning/Fail maps, and graphical results identifying problem areas based on user inputs, Interface Analysis allows users to see what is happening between two dynamic surfaces throughout the entire reflow process.

For more information, meet company representatives in Booth #134 during SMTA International.

About Akrometrix LLC

Akrometrix LLC, the leader in elevated temperature surface characterization, was founded in 1993 by Dr. Charles Ume, a Professor and Director of the Advanced Electronic Packaging and Laser Processing Laboratory, at the George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.  Headquartered in Atlanta, Akrometrix supports over 250 equipment installations worldwide. 

Share

Print


Suggested Items

Joe Fjelstad Breaks Down His Occam Process

03/04/2020 | I-Connect007 Editorial Team
Joe Fjelstad recently met with the I-Connect007 Editorial Team to discuss the potential benefits of his Occam process for solderless assembly. This technique allows assembly of the PCB without the risks associated with traditional surface-mount processes, such as solder joint failure. Has the time come for the industry to embrace Occam?

IPC APEX EXPO 2020 Attendees Speak: Mike Montesi

03/02/2020 | I-Connect007 Editorial Team
"One of the biggest challenges for me selling is educating customers that they can generate oxygen and nitrogen on their own for up to 90% savings versus getting trucked in deliveries," said Mike Montesi of On Site Gas Systems. "It’s all about education because 98–99% of customers are used to the high cost of delivered gases, where we can separate it on-site with their own equipment, and the payback is typically under a year."

Stencils: Not As Simple As They Seem

02/26/2020 | I-Connect007 Editorial Team
Stephanie Hardin of Integrated Ideas and Technologies Inc. discusses her role in the supply chain as a stencil manufacturer, improvements she sees from micromachined step stencils, and why she believes trying to have standardized stencil layouts is wishful thinking due to the many fluctuating variables.



Copyright © 2020 I-Connect007. All rights reserved.