Nordson to Feature Test and Inspection Systems at SMTAI


Reading time ( words)

Nordson DAGE and Nordson YESTECH, divisions of Nordson Corporation, are pleased to announce that their products will be featured in the SMTA International – National Physical Laboratory (NPL) Defect Database Live Solder Paste and Solder Joint Automatic Inspection Experience from Sept. 29-30, 2015 on the show floor of SMTAI. 

This year's special feature area will include live printing ultra-fine pitch deposits, 0201 and 01005 devices, inspection and measurement of different combinations of materials, plus some of the key in-process inspection steps to make a process perform correctly. It also will include AOI inspection of printed circuit board assemblies (PCBAs) for open joints, lifted leads, partial lifting of passives and other less common defects. A series of test boards have been specially created with known process defects to show the machines' capabilities.

Bob Willis will use the Nordson YESTECH BX AOI system and Nordson DAGE XD7500VR Jade FP among other leading equipment to inspect process defects. The Nordson YESTECH BX AOI benchtop platform offers off-line benchtop PCB inspection with exceptional defect coverage. The Nordson DAGE XD7500VR Jade FP X-ray inspection system uses the latest technology flat panel detector to provide a market-leading, cost-effective approach where high quality real-time imaging is needed for production tasks.

For more information, visit http://www.smta.org/smtai/sMTAIExperience.cfm.  

About Nordson DAGE

Headquartered in Aylesbury, UK, Nordson DAGE is a unit of the Nordson Corporation and manufactures and supports a complete range of award winning digital X-ray inspection systems and bond test equipment for the printed circuit board assembly and semiconductor industries.  

About Nordson YESTECH

Headquartered in Carlsbad, California, Nordson YESTECH is a leading provider of automated optical inspection systems with integrated yield enhancement solutions for the printed circuit board assembly  and advanced semiconductor-packaging industries, Nordson YESTECH is operated and managed by a team of industry experts with a history of success, bringing powerful and cost-effective inspection to the electronics market. The company has sales offices and customer support centers in North America, Asia and Europe.

About Nordson Corporation

Nordson Corporation engineers, manufactures and markets differentiated products and systems used for the precision dispensing and processing of adhesives, coatings, polymers and plastics, sealants, biomaterials and other materials and for fluid management, test and inspection, UV curing and plasma surface treatment, all supported by application expertise and direct global sales and service.  Nordson serves a wide variety of consumer non-durable, durable and technology end markets including packaging, nonwovens, electronics, medical, appliances, energy, transportation, construction, and general product assembly and finishing.  Founded in 1954 and headquartered in Westlake, Ohio, the company has operations and support offices in more than 30 countries.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.