Ascentech to Exhibit Optilia Inspection, GEN3 Systems Solutions at SMTAI


Reading time ( words)

Ascentech, LLC will exhibit and demonstrate new test and process optimization instruments and solutions at the upcoming SMTA International Conference and Exhibition in Rosemont, IL, Sep. 27 - Oct. 1, 2015. Ascentech will exhibit these new products in booth #219.

Products will include the Solder Saver Solder/Dross separation tool, award-winning GENSONIC Ultra-Sonic Stencil Cleaner, the Optilia High Definition Camera Inspection System, the Optilia BGA Inspection scope, and more. Ascentech, LLC is the North American distributor for visual Inspection Instrument manufacturer Optilia Instruments AB, as well as GEN3 Systems Ltd.

Ascentech will also provide the Optilia HD camera system and GENSONIC Stencil Cleaner to this year's SMTAI Special Feature area, supported by SMTA & NPL. This learning area will include live printing ultra-fine pitch deposits, 0201 and 01005 devices, inspection and measurement of different combinations of materials, plus some of the key in-process inspection steps to make a process perform correctly. It will also include AOI inspection of printed board assemblies for open joints, lifted leads, partial lifting of passives and other less common defects.

Optilia offers obstruction‐free, fatigue‐free High‐definition benchtop inspection for PCB assembly, and real‐time BGA inspection solutions.

The GENSONIC is a manually-operated, ultrasonic transducer unit for cleaning stencils used in printing solder pastes and adhesives. It can be used either directly on the printer or at a separate cleaning station.

The Solder Saver is a hand held, compact system for separating Dross from good solder. The unit easily reduces hardened dross material to oxide powder making it possible to remove the dross oxide waste from the solder pot, leaving valuable solder in the pot.

About Ascentech, LLC

Ascentech, LLC is the North American Distributor for Optilia Instruments AB, as well as GEN3 Systems, and also supplies the industry with other testing and process  optimization solutions for electronics manufacturing.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.