Alpha’s LED Product Range to be Showcased by Esman Elektronik at LED & LED Lighting Show, Istanbul


Reading time ( words)

Alpha, the world leader in the production of electronic soldering materials, and its innovative range of products for LED assemblies will be showcased by its Premium Distributor for Turkey, Esman Elektronik, at the LED & LED Lighting Show in Istanbul, Turkey on the 1st – 4th October. Hall 9 Booth A320.

Alpha’s LED product offering has benefits for each level of LED Manufacturing from Package on Board, Luminaire Assembly, Power Driver and Control System Assembly. Alpha’s innovative Lumet™ range of solder pastes with SAC and Maxrel Alloys can improve thermal cycling leading to higher reliability especially in outdoor lighting applications, improved vibration resistance and low voiding. This leads to increased solder joint reliability and can improve the life span in the end use application.

Alpha’s low temperature Lumet™ offering, ALPHA® Lumet™ P52 which has a melting point of below 140°C, can provide lower energy consumption in Luminaire Assembly and higher reliability. The low melting point enables the elimination of wave soldering or selective soldering which can significantly reduce electronic assembly production costs.

Alpha and Esman Elektronik have enjoyed a long partnership, with Esman Elektronik distributing Alpha products across Turkey. Esman Elektronik this year became part of Alpha’s exclusive Premium Distributor Council.

For more information on Alpha’s LED product offering visit Esman Elektronik at the LED and LED Lighting show in IFM Yesilkoy, Istanbul, Hall 9 – booth A320 or go to the Alpha Website.

About Esman Elektronik

Esman Elektronik provides sales, process support, training, and service to Alpha’s customers and potential customers in Turkey. Their dedicated engineering team represents many of the world's industry leaders in electronics manufacturing equipment and also consumables & tools. Founded in 1979 and located in Istanbul Cengelkoy, they are the official international service provider and the repair center in Europe for several companies, providing 24/7after sales service.

About Alpha

Alpha, a business unit of Alent plc, is the global leader in the development, manufacturing and sales of innovative specialty materials used in a wide range of industry segments, including electronics assembly, power electronics, die attach, LED lighting, photovoltaics, semiconductor packaging, automotive and others.

With a unique global presence in over 30 locations throughout the Americas, Europe and Asia Pacific regions, Alpha supplies a full line of ALPHA® electronics assembly material products, including Solder Paste, Exactalloy® Solder Preforms, Cored Solder Wire, Wave Soldering Fluxes, Bar Solder Alloys, and Stencils.  It offers die attach product technologies to the power electronics segment in its Argomax®, Atrox™, Maxrel™, and Fortibond™ brands. For the LED segment, Alpha offers its Lumet™ products covering applications from die attach to systems assembly in the LED manufacturing process.

Alpha also offers product technologies for the Photovoltaic segment, including its unique pre-fluxed ALPHA® PV Ready Ribbon®, high performance standard ribbon, bus bar, solder wire and flux. Alpha’s Advanced Materials unit is the leader in electronic polymers and solder materials for semiconductor packaging applications.  Since its founding in 1872, Alpha has been committed to developing and manufacturing the highest quality specialty materials.  For more information, visit www.alpha.alent.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.