STI Introduces IPC-A-600 PCB PROCESS SEQUENCE KIT


Reading time ( words)

STI Electronics, Inc., a full service organization providing training resources, analytical/failure analysis, prototyping, and small-to-medium volume PCB assembly, is pleased to introduce the new IPC-A-600 PCB PROCESS SEQUENCE KIT. The kit is designed as an aid to individuals teaching the IPC-A-600 Acceptability of Printed Boards Training and Certification Program or for anyone in need of visual aids to assist with explaining the various steps of the PCB fabrication process.

For many years, the IPC-A-600 Acceptability of Printed Boards has set the standard for PCB workmanship quality, giving comprehensive acceptance criteria with full color illustrations and photographs showing all types of printed board surface and internal conditions. Many of the users of the document and the training program do not work in the board fabrication process, but may perform audits and incoming inspection.  This results in students not being familiar with what the boards look like at the various steps in the fabrication process and makes it more difficult for them to comprehend some of the acceptance criteria.

The IPC-A-600 PCB PROCESS SEQUENCE KIT contains boards that represent various steps in the PCB fabrication process, along with documentation describing the process steps, care and handling instructions. Its compact size makes it easy-to-use in any environment.

To place an order, contact sales at 1-800-858-0604 or sales@stielectronicsinc.com.

About STI Electronics, Inc.

Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small-to-medium volume PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.