-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Considering Temperature Control as a Cleaning Method
November 20, 2015 | Steve Ring, Foresite Inc.Estimated reading time: 1 minute
How can accurately controlling the thermal profile of your solder reflow process improve the cleanliness of your electronics?
A proper thermal profile more effectively complexes no-clean flux residues, mitigating a potential product reliability issue. The residues become benign, non-corrosive and non-conductive; ion chromatography (IC) cleanliness test results improve (as do SIR test results). Additionally, solder joints benefit from improved intermetallic formation.
What to consider
Many variables impact solder joint quality, including several directly related to the reflow profile:
- The actual temperature(s) of the surfaces to be joined (accurate profiling is critical)
- The dwell time above liquidus and maximum temperature
- The uniformity/distribution of heat
- The cooling rate
Component density in various areas of an electronic assembly can significantly affect the actual temperature attained in an area and the actual time at that temperature. Best practices for thermal profile control and monitoring should be followed.
Foresite investigated the effects of thermal profile variation on product reliability, and lead investigator Eric Camden presented the findings at the SMTA International 2014 Conference. Sample Foresite UMPIRE 2 board assemblies were reflowed at the recommended peak temperature and at temperatures below and above the recommendation, then evaluated with IC, SIR and cross-sectioning. A lead-free, no-clean paste with a recommended peak processing temperature of 250°C was used.
Findings
The acceptable range of peak temperature to produce quality solder joints is narrow – samples produced 20°C below the recommendation consistently produced unusable samples. Those processed only 10°C below the recommendation had poor intermetallic formation and failed IC and SIR tests. Processing at the recommended peak temperature resulted in improvements in all areas.
Exceeding the recommendation by 10°C resulted in the best intermetallic formation and acceptable IC/SIR results. However, watch for unintended consequences such as thermal damage to components, reinforcing the need to maintain good, tight, process control.
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.