Mentor Graphics: The Past, Present and Future of Analytics

Reading time ( words)

On the final day of SMTA International in Chicago, I sat down with Farid Anani, consulting manager with Mentor Graphics' Valor Division. We discussed a paper he presented at SMTAI that focused on analytics and how it can be used to increase business revenue. The conversation then explored how far analytics has come in the last 20 years and where it may be headed in the future.

Andy Shaughnessy: Farid, I understand you presented a paper this morning. Will you tell us about that?

Farid Anani: The paper's main topic was how to use analytics to create new business revenue. We are looking to the next two to three years, at the trends of how analytics has been used how analytics should be used, and proposing and suggesting ways for our customers to leverage this data to create more business. Basically, it involves building services around the data.

Shaughnessy: One would think that companies would just naturally be doing this, but that's not the case, obviously.

Anani: Some companies have been doing this, to a limited extent. In our view, the effort has been fragmented and focused on specific, continuous improvement projects. There has not been an effort to really spread across different data inputs and collect data from different platforms that are involved in the product life cycle, design, manufacturing, and servicing after it’s released to the market. There is not a single platform that aggregates all of this data and makes sense out of the trends and creates actionable intelligence for the end user.

Shaughnessy: What is Valor's perspective? How can you all help?

Anani: We are collecting a large amount of data. All of today's factories are equipped to collect data on-the-fly from every piece of equipment imaginable on the production floor. The data is already there, and getting to the point of collecting data is challenging by itself. You have various equipment communicating using different protocols, and there really isn't a specific standard in the circuit board assembly industry for equipment to communicate with. I'm going to use some names here, just as examples. You have Fuji, Assembleon, Panasonic, DEK, and many others. Each piece of equipment collects and stores data in a different platform and different format. There is the challenge of data normalization, but then the bigger challenge is what comes next: How do you extract meaningful patterns for meaningful services for the customers?

I'll give you an example of what a meaningful service might look like that spans multiple areas of the product's realization. For instance, a designer may be in England. He will lay out the board, then he might send it to a company in Germany to perform the assembly. Meanwhile, somebody from the manufacturer might decide to run DFM analysis on the product and get data. Right now, the designer might see the DFM report, and he may or may not incorporate any changes in his design. Going further down the road, as the manufacturer begins to assemble the product, they are collecting data on the quality and performance of the product on the production floor, as they are building it. Data is available from inspection equipment; data is available from test equipment. That data never makes it back to the designer, number one. That data also never gets correlated with the DFM report. An issue may have been exposed in the DFM report that the designer purposely elected to ignore because he or she felt it was not relevant enough. Then, on the manufacturing floor, it's actually causing yield issues. We want to build that kind of service, so they can go to their customer and show them the entire history of what's happening on the product, between revisions and on the production floor.

Shaughnessy: So, if you're providing consulting services at an assembly facility, for example, you go in and get the lay of the land. Then, you can decide how Valor could best help them. You would then help set it up for them?

Anani: Absolutely, that's our approach. As you might expect, every customer is unique in their own way. Everybody is looking for something different, and everybody has different tools. This is what makes it nearly impossible to create an out-of-the-box solution that will fit everybody. That's why this kind of analytics is a better fit for a consulting organization than it is a fit for a product organization.

Shaughnessy: Sure, because it's customizable.

Anani: Mostly, it's customizable.

Shaughnessy: That's very cool. What kind of customers is it most popular with?



Suggested Items

Smart Factory Transitions Are Attainable—With a Plan

06/04/2019 | Nolan Johnson, I-Connect007
In a white paper, Zac Elliott, technical marketing engineer at Mentor, a Siemens company, outlines a structured organization for smart factory implementation. While there can be one set of challenges to overcome when building a smart factory on a greenfield site, firms restricted to pre-existing facilities face a different set of hurdles. In this interview, Elliott discusses how things have proceeded since the paper was published, and talks about strategies for smaller firms and brownfield companies.

Filling the Skills Gap: Strategic Hiring and Succession Planning

04/03/2019 | Nolan Johnson, I-Connect007
While attending the IEEE Rising Stars Conference in Las Vegas, Nevada, I had a long and insightful conversation with veteran technical recruiter Terry McNabb. We covered so much information that the interview has been broken into two sections. This section features our discussion on the shortage of mid-career expertise in the workforce and best practices for hiring experienced technical staff.

Mentor and Seica Partner for Data Prep and Testing Big Boards

01/18/2019 | Pete Starkey, I-Connect007
Mark Laing, business development manager of the Valor division at Mentor, a Siemens company, and Luca Corli, director of sales at Seica, speaks with I-Connect007 Technical Editor Pete Starkey about the partnership between their two companies, which enables efficient data preparation for testing big boards, and accelerates new product introduction (NPI) cycles.

Copyright © 2019 I-Connect007. All rights reserved.