Seika Machinery Introduces the MALCOM DS-10 Dip Tester


Reading time ( words)

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, is pleased to introduce the MALCOM DS-10 Dip Tester. The tester provides data transmission to a PC by USB cable, creating a profile function. The dedicated software implements a high level of process management.

The created temperature profile makes it possible to monitor (50ms sampling rate) the temperature of the preheat and solder temperature sensors, in addition to the conventional management items. The system is equipped with a new Dip Time Sensor for accurate measurement. A heat-resistant cover for high-heat loads, such as Nitrogen ovens also is available as an option.

For more information, Michelle Ogihara, Senior Sales Manager at 310-540-7310; e-mail michelle@seikausa.com; or visit www.seikausa.com.

About Seika Machinery, Inc.

Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.



Copyright © 2019 I-Connect007. All rights reserved.