Computrol Increases Inspection Capabilities at Its Idaho Plant with Two MIRTEC MV-7 OMNI 3D AOI Systems


Reading time ( words)

Computrol, Inc., a world-class provider of mid- to low-volume, high-mix electronic manufacturing services to OEMs, today announced that it has purchased two MV-7 OMNI 3D In-Line AOI Machines from MIRTEC. The systems have been installed at Computrol’s Meridian, ID facility. Computrol selected the MV-7 OMNI 3D In-Line AOI system again, following the success it has had with the systems installed at its Orem, Utah facility in 2014.

“With the purchase of the two new MIRTEC MV-7 OMNI 3D AOIs, we now have four MIRTEC MV-7 OMNI’s between our two facilities,” said James Spencer, Engineering Manager for Computrol. “With the addition of 3D inspection, we are now able to find more defects in the line so that we can respond to process issues at our Idaho plant in real-time. We have been very impressed with the first two AOI systems and the service that we’ve received from MIRTEC, and are excited to ramp up our capabilities at our Idaho facility.”

“We at MIRTEC are extremely focused upon providing the industry’s most technologically advanced 3D inspection solutions to our valued customers,” said Brian D’Amico, President of MIRTEC’s North American Sales and Service Division. “We are very pleased to welcome Computrol, Inc. to our growing family of satisfied MIRTEC customers.  We look forward to a long a prosperous relationship between our two organizations.”

The MV-7 OMNI 3D In-Line AOI Machines are configured with MIRTEC’s OMNI-VISION® 3D Inspection Technology which combines an exclusive 15MP 2D ISIS Vision System with MIRTEC’s revolutionary Digital Multi-Frequency Quad Moiré 3D system to provide precision inspection of SMT devices on finished PCB assemblies. The MV-7 OMNI features four (4) 10 Mega Pixel Side-View Cameras in addition to the 15 Mega Pixel Top-Down Camera. For more information, visit www.mirtec.com.

For more information about Computrol’s manufacturing capabilities, visit www.computrol.com.

About Computrol, Inc.

Computrol, Inc., with manufacturing facilities in Meridian, Idaho and Orem, Utah, is a leading national provider of high-quality, low-volume electronics manufacturing capabilities, serving military, medical, aerospace, broadcast and general industry customers. For more information about Computrol, Inc., visit www.computrol.com.

Share

Print


Suggested Items

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

Reliability Testing in Automotive and Digital Factories

12/11/2019 | Barry Matties, I-Connect007
Barry Matties spoke with Gen3’s Andrew Naisbitt about what readers should know about SIR and CAF testing, what to consider if you’re thinking of bringing it in-house, and how reliability testing fits into automotive and the digital factory.

André Bodegom on European Challenges, Automation, and Automotive

12/02/2019 | Pete Starkey, I-Connect007
Editor Pete Starkey speaks with André Bodegom, managing director for Adeon Technologies in the Netherlands, about changes he has seen over the years in major industry sectors, challenges in the European market, and other areas of growth.



Copyright © 2020 I-Connect007. All rights reserved.