Fred Dimock Will Discuss LED Assembly at ACI Technologies Workshop


Reading time ( words)

BTU International, Inc. today announced that Fred Dimock will present at the ACI Technologies Workshop, scheduled to take place Tuesday, Feb. 9, 2016, at its facility in Philadelphia, Pa. Dimock will discuss Light Emitting Diodes (LED) assembly and packaging with an emphasis on reflow considerations.

In his first presentation, Dimock will present opportunities and challenges with LED, including the changing market and where it might be heading. Additionally, he will go over thermal process opportunities, with a brief overview of silver sintering and direct bonded copper (DBC).

In his second presentation, Dimock will talk about reflow and stress control, repeatability and oven flexibility/options. The presentation will include a demo of the Energy Pilot Software.

Dimock is the manager of process technology at BTU International in Massachusetts. He holds an Associate’s Degree in Mechanical Design from Wentworth in Boston and a Bachelor’s Degree in Ceramic Engineering from the State University of New York at Alfred (SUNY). His extensive experience in thermal processing includes positions at Corning, General Electric and Osram-Sylvania before joining BTU.

About BTU International

BTU International, a wholly-owned subsidiary of Amtech Group (Nasdaq: ASYS), is a global supplier and technology leader of advanced thermal processing equipment and processes to the electronics manufacturing and alternative energy markets. BTU equipment is used in the production of printed circuit board assemblies and semiconductor packaging as well as in the manufacturing of solar cells and nuclear fuel. BTU has operations in North Billerica, Massachusetts, and Shanghai, China, with direct sales and service in the U.S.A., Asia and Europe.

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 2)

07/24/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
In the last three to five years, there has been a resurgence of interest in the use of low melting point alloys for SMT applications. Typically, the compositions are around the eutectic bismuth-tin alloy, perhaps with additions of other elements to increase the robustness of certain alloy properties. Now, there are several new products on the market and numerous ongoing reliability projects in industry consortia.



Copyright © 2019 I-Connect007. All rights reserved.