Valtronic Improves Production Capabilities


Reading time ( words)

Valtronic has acquired two high-quality technologies—Kurtz Ersa North America's HR600 Hybrid Rework System and Nordson ASYMTEK’s Quantum Q-6800 Dispensing Unit for Encapsulation—to improve its production capabilities. Both systems currently are being installed, and Valtronic plans to begin using them early this year.

Kurtz Ersa North America’s HR600 hybrid rework system is equipped with a highly dynamic and efficient heating technology with the bottom-side heating (2,400 W) divided into three independent-heating zones. The newly developed hybrid top-side emitter provides 800 W of heating power and combines the advantages of infrared heating with those of a convection heater. In order to thermally control the rework process, the HR 600 uses proven closed-loop technology.

Nordson ASYMTEK’s Quantum Q-6800 high-value fluid dispensing system delivers uncompromising quality, value and productivity for demanding fluid dispensing applications. A high-performance, large-format dispensing platform, the system features a large dispense area with a laser height sensor (LHS) while new sophisticated system electronics and controls provide enhanced versatility. The larger dispense area is well suited for dual-valve dispensing and is ideal for a wide selection of substrate sizes, fluids and processes used in packagingand assembly dispensing applications.

The hybrid rework system and the dispensing unit for encapsulation are an upgrade to the technologies currently in use on the production floor. The company purchased these technologies with the purpose of improving the speed and quality of its lines.

Share




Suggested Items

VJ Electronix: Automating the X-ray Inspection Process

05/04/2022 | Nolan Johnson, I-Connect007
VJ Electronix's Brennan Caissie shares the benefits of a new inspection tool that can be used on a variety of boards, with an automated system that takes the pressure off the manufacturing floor operators and can provide feedback all the way to the design process.

Real Time with… IPC APEX EXPO 2022: Blackfox Mixes It Up with Training Opportunities

01/11/2022 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy speaks with Jamie Noland, master IPC trainer and marketing manager for Blackfox Institute, about current and upcoming training opportunities and what you can expect from them at the show. Blackfox has expanded its offerings to reach a wider audience, including some very basic classes for beginners.

Don’t Miss Further Discussion of Materials Testing in GEN3 Episode 6 of ‘Predicting Reliability in Electronics’

12/22/2021 | I-Connect007 Editorial Team
The sixth episode, “Materials Testing—Process Materials,” can be viewed in under four minutes. Presenters share information on paste vs. flux vs. rework, limitations of standards, hand soldering/rework cautions, and more. Designed to complement GEN3’s book, The Printed Circuit Assembler’s Guide to...Process Validation, this entire webinar series can be viewed in about an hour and covers a comprehensive range of topics surrounding the four groundbreaking test standards published between 2019 and 2021 that set the scene for Objective Evidence and its widespread influence throughout the world of electronics, whether in the high reliability arena of space, medical, automotive, or general industrial applications.



Copyright © 2022 I-Connect007. All rights reserved.