VJ Electronix, Apollo Seiko Collaborate to Improve Robotic Soldering Performance


Reading time ( words)

VJ Electronix, Inc., the leader in rework technologies and global provider of advanced X-ray inspection systems, and Apollo Seiko, the technology leader for automated point soldering systems, announce the joint development of PCB preheat to enhance the performance of robotic soldering. The addition of preheat, or board conditioning, is one way to improve all types of soldering operations from hand soldering to automated rework and selective soldering.

Typically, a bottom-side heater is used to heat the entire board to an intermediate temperature, below the melting point of solder. This preheating minimizes thermal stress in the board and reduces energy required for a localized soldering operation. The net result is improved reliability and increased throughput.

VJ Electronix has customized its IR preheater series to fit seamlessly within the Apollo Seiko system. The unit will operate with a pre-set power level, or with active temperature feedback from the board.

According to Apollo Seiko Technical Specialist Rick Schifer, “With the additional preheat, our customers are able to address many of the more difficult soldering challenges, such as thick and multilayer PCBs, embedded ground planes and large body components. As an integrated option with our L-CAT NEO and SCARA soldering systems, the use of automated preheat will ensure a robust and high-quality soldering process.”

About Apollo Seiko

APOLLO SEIKO is a technology-based company that specializes in automated point soldering systems. We have dedicated our knowledge and competence during the past 45 years in the designing and development of automated soldering systems, setting the industry standard in this specialized technology of both contact and non-contact solutions.

About VJ Electronix

VJ Electronix, Inc. manufactures production ready, automated Rework and X-ray inspection systems with many advanced capabilities. The company frequently provides custom solutions tailored to satisfy specific application requirements. VJ Electronix is a worldwide leader in X-ray Inspection and Rework equipment.

Share

Print


Suggested Items

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Recent Advances in X-ray Technology: SMTA Webinar Recap

08/12/2019 | Pete Starkey, I-Connect007
Technical Editor Pete Starkey recently attended a webinar on advances in X-ray technology and its applications in the electronics industry, as presented by Keith Bryant, Chair of SMTA Europe, on behalf of SMTA India. Here are the highlights of the webinar.

Cadence Design Systems Takes Tensilica to CES Show Floor

04/26/2019 | Nolan Johnson, I-Connect007
While roaming the aisles of CES, I happened across a suite hosted by Cadence Design Systems. It wasn’t a booth—just a quiet presence behind walls with demonstration hardware inside. Vic Markarian, senior group director for worldwide IP licensing and sales, explains why Cadence was at CES.



Copyright © 2019 I-Connect007. All rights reserved.