AIM’s Timothy O’Neill and Karl Seelig to Present at IPC APEX 2016


Reading time ( words)

AIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Timothy O’Neill, AIM’s Technical Marketing Manager, and Karl Seelig, AIM’s Vice President of Technology, will present at IPC APEX 2016 March 15-16, 2016 at the Las Vegas Convention Center in Las Vegas, Nevada.

O’Neill will present his white paper “The Impact of Reduced Solder Alloy Powder Size on Solder Paste Print Performance” at the Solder Paste Development technical conference on March 15, 2016 from 3:30–5 pm located in S225 of the Las Vegas Convention Center. O’Neill’s paper covers the demand for increased functionality in smaller spaces for electronics and how solder paste manufacturers need to incorporate finer metal powder in solder paste to facilitate ultra-fine pitch printing.

Seelig will speak at the High-Reliability Lead-Free Solder Alloys technical conference scheduled for March 16, 2016 from 10:30 am–12 pm located in S224 of the Las Vegas Convention Center. This session will cover the increasing demand for high-reliability electronics, which is driving an increase in demand for lead-free solder alloys that exhibit more robust thermal cycling and mechanical characteristics.

For more information about AIM’s complete line of solder products and services, including lead-free and halogen free products and SN100C, visit the company at booth #3100 at IPC APEX or click here

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. 

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.



Copyright © 2019 I-Connect007. All rights reserved.