SMT Prospects and Perspectives: AI Opportunities, Challenges, and Possibilities, Part 1
Nolan’s Notes: Do More, Get More
Global Sourcing Spotlight: Don’t Be Afraid of Global SourcingULT Intros Filtration Unit for Combustible Laser Dusts
March 4, 2016 | ULT AGEstimated reading time: 1 minute
ULT AG has launched the LAS 300.81-HFM054, an ATEX certified extraction and filtration unit with H class filtration that is suited for the removal of combustible dusts. The unit is classified as a dust extractor according to filter class H, corresponding to dust technical approval tests and meeting DIN EN 60335-2-69. The system is perfectly suited for extraction and filtration of dry dust particles with TLV < 0.1 mg/m³ (Threshold Limit Value) as well as carcinogenic emissions.
Additionally, the LAS 300.81-HFM 054 is an extraction and filtration system for combustible dusts according to dust explosion category 1 and explosive dust-air mixtures that are neither self-ignitable nor pyrophoric. The Ex unit of group II, category 1D is compliant with ATEX directive 94/9/EG.
The unit has been developed for extraction and filtration of dry dusts that occur during laser processing such as cutting, engraving or structuring. The LAS 300 series system features a combination of cartridge and storage filters. The filter elements' material ensures an efficient separation of various particulate matters.
The system's main filtration module consists of two class M cartridge filters with optional Teflon coating, which are jet stream cleaned at regular intervals. The pneumatic dedusting guarantees an extremely high endurance of the main filter. A HEPA filter H14 is utilised as a secondary filter, ensuring a separation rate significantly higher than 99.995%.
The stationary extraction and filtration unit is equipped with stepless volume flow control, filter condition indicator and interface for control by means of external systems. It complies with statutory dust limits, efficiently protecting employees, systems and products from air-borne pollutants that occur in material processing through laser technology.
Share on:
Suggested Items
ULT to Introduce New Soldering Fume Extractor at productronica
09/20/2023 | ULT AGAt this year's productronica, the world's leading trade show for electronics manufacturing, ULT will present a brand new extraction solution for solder fumes and vapor.
Pall Corporation Invests in New Facility to Support Growing Semiconductor Demand
05/18/2022 | PRNewswirePall Corporation, a leader in filtration, separation and purification technology, announced the construction of a new manufacturing facility focused on solutions that will serve advanced nodes for semiconductor manufacturers.
ULT Demonstrates Fume Extraction Solutions for Emission Reduction at SMTconnect
03/18/2022 | ULT AGAt the upcoming trade show SMTconnect, ULT will exhibit worldwide leading solutions for air purification in electronics manufacturing. The positive effects of sustainable extraction and filtration technology on process chains, product and manufacturing quality, and employee health will be demonstrated.
Arlon EMD Accelerates Investments in Operations
01/24/2019 | Arlon EMDArlon EMD, a veteran-owned manufacturer of high-performance polyimide and other specialty resin materials based in Rancho Cucamonga, California, has completed another phase of facility improvements targeting enhanced cleanliness of laminate and prepreg. This investment in operational improvements is the third in the past 18 months and the fifth capital investment over the past 36 months focused on material cleanliness.
ULT Cooperates with GulfTech
03/27/2018 | ULT LLCFume extraction vendor ULT LLC and Florida based GulfTech Enterprises – Casiba Group have commenced a partnership. Since March 2018, GulfTech has focused on sales and service of ULT’s air treatment solutions in the US states of Florida and Southern Georgia.