Indium Features InFORMS Reinforced Solder Preforms at PCIM


Reading time ( words)

Indium Corporation will feature its reinforced indium and solder alloy fabrications, InFORMS, at PCIM Europe, May 10-12 in Nuremberg, Germany.

InFORMS are reinforced solder preforms that maintain a constant bondline thickness, thus significantly improving thermal cycling reliability. This is a key requirement in IGBT assembly of the DBC to the baseplate.

Key benefits of soldering InFORMS between DBC and baseplate include:

  • 4X improved thermal cycling reliability compared to a preform-only approach
  • 2X improved thermal cycling reliability compared to a preform + Al wirebond stitch approach
  • Low-voiding of
  • Lowest cost of ownership – a drop-in replacement for a preform with no additional process steps or equipment needed

InFORMS provide engineers with an enhanced material for the development of new, or the improvement of existing, applications. For more information about InFORMS, click here or visit Indium Corporation at stand 7-413.

For more information about Indium Corporation, click here or email abrown@indium.com

Share

Print


Suggested Items

Solder Paste Printing From the Stencil’s Perspective

02/19/2020 | I-Connect007 Editorial Team
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

Solder in PCBA: Can’t Live Without It... or Can We?

02/17/2020 | Joe Fjelstad, Verdant Electronics
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.



Copyright © 2020 I-Connect007. All rights reserved.