Metcal to Exhibit with SmartTec at SMT Nuremberg


Reading time ( words)

Metcal has announced that it will exhibit in Hall 7, Stand 109 with distributor SmartTec at the upcoming SMT/Hybrid/Packaging show, scheduled to take place April 26-28, 2016 at the Messe in Nuremberg, Germany. Metcal’s Scarab Site Cleaning System (APR-2000-SCS) will be on display, along with the Scorpion Rework System, the MX-5200 Soldering & Rework System, and the soon-to-be-launched Solder Wire Feeder.

The Scarab ensures accurate and repeatable cleaning of the component pad in one user-friendly system. It redefines performance and addresses the technical demands presented by component manufacturers today. Additionally, the Scarab addresses the industry needs with an automated system capable of cleaning components pads without contact.

The Scorpion System redefines precision and addresses the technical demands presented by component manufacturers today.  Features include a placement package capable of 50mm of motorized travel in the Z-axis and a full 360° in ϴ (Theta). The placement package offers fine motor control in the Z-axis and ϴ during alignment of the component to the pad. Also included is a new force feedback control during the placement process, enabling the unit to accurately pick and place components without disturbing the component or solder.

The MX-5200 features a dual-simultaneous use option, meaning that two hand-pieces can work from one power supply at the same time. The dynamic option enables the two hand-pieces to share 80 watts output power based on demand, adding even more application flexibility and speed.  Four different hand-pieces and a comprehensive range of soldering and rework cartridges support the MX-5200 Series simultaneous dual operation. These include the Metcal Advanced™Hand-Piece for SMD rework, a Metcal Ultra-Fine™ Hand-Piece for fine access, a Precision Tweezer capable of removing a range of components from 0201 chips to 28mm SOICs, and a Desoldering Gun for safely removing through-hole components.

The USF-1000 Solder Wire Feeder System adds control and convenience to the soldering process. The digital controls, high performance, and its ability to handle multiple solder diameters provide repeatability and functionality to the process.  The USF-1000 pairs with the Metcal MX-5200 or MX-500 Soldering and Rework Systems.

For more information about Metcal stop by Hall 7, Stand 109 at the show, or click here.

About Metcal

Since 1982, Metcal has been a recognized worldwide leader in the electronics assembly marketplace. As part of OK International, Metcal’s industry-leading position addressing advanced technology in conduction soldering and rework/repair, has and will continue to broaden to a full electronics bench tool single-source solution. Metcal product lines currently include: hand soldering and desoldering, convection rework products, fume extraction and fluid dispensing tools. 

Share

Print


Suggested Items

IPC APEX EXPO 2020 Attendees Speak: Dr. Martin Anselm

02/14/2020 | I-Connect007 Editorial Team
"The biggest challenge I’ve encountered a number of different times is the migration to much larger packaging," said Dr. Martin Anselm, director of CEMA Lab. "Devices are getting much larger, and with the thousands of I/O of solder joints, and they are not just single-die, multi-chip modules in different forms or 2.5D technologies. Further, there are challenges associated with soldering. How do we go away from traditional soldering technologies or methodologies where these devices are so complex that warpage or alloy or reliability is driving us into unknown territories with soldering methodologies?

LPKF on Stencils and Depaneling

02/11/2020 | I-Connect007 Editorial Team
Stephan Schmidt and Mirela Orlowski of LPKF Laser & Electronics North America discuss laser technology in cutting stencils and depaneling circuit boards as a factor in shrinking component sizes and why few people in the industry realize how much of an impact the stencil can have on the manufacturing line.

Clean vs. No-clean: A Generational Difference

12/24/2019 | Barry Matties, I-Connect007
Tom Forsythe, executive VP of KYZEN, discusses what readers should know about cleaning as reliability expectations continue to increase. He also explains what is driving the new interest in cleaning and why engineers from the no-clean generation may not even realize they need to learn more about cleaning.



Copyright © 2020 I-Connect007. All rights reserved.