SMTA and CALCE Seeking Abstracts for LED Symposium


Reading time ( words)

The SMTA and CALCE are pleased to announce the LED Assembly, Reliability, and Test (A.R.T.) Symposium will take place from November 29 to December 1, 2016 at the Crowne Plaza Midtown in Atlanta, Georgia.

The LED Assembly, Reliability & Testing (A.R.T.) Symposium will provide attendees with information to bridge the gap between the semiconductor physics and the architectural design level issues in LED supply chain. The design, manufacturing, reliability assessment, testing and inspection of LEDs and LED lighting products are not at the same level of development and interest. The LED A.R.T. Symposium is the forum for the industry to explore the problems faced and offer solutions.

The topics of interest include but not limited to:

  • LED Assembly
  • LED Failure Mechanisms
  • LED Packaging
  • Applications
  • Reliability and Testing
  • Package and Board Cleaning
  • Architectural/Smart Lighting
  • UV and IR LEDs
  • Wearable Sensors-LEDS
  • LED Driver System

If you would like to present at this conference, please submit a 200-300 word abstract HERE by June 15, 2016. Please include a title, author name, and contact information with your abstract. You can also submit proposals for half or full day workshops.

For more information on the conference, exhibition, or sponsorship opportunities, please contact Jenny Ng (jenny@smta.org) at 952-920-7682. For more information on the Technical Program and Tutorials, contact the Program Chair, Dr. Diganta Das (diganta@umd.edu).

About SMTA

The SMTA membership is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations.

About CALCE

The Center for Advanced Life Cycle Engineering (CALCE), the largest electronic products and systems research center focused on electronics reliability, is dedicated to providing a knowledge and resource base to support the development of competitive electronic components, products and systems.

Share

Print


Suggested Items

The iNEMI 2019 Board Assembly Roadmap

06/01/2020 | Pete Starkey, I-Connect007
iNEMI continues to publish chapters of its 2019 Roadmap and recently presented an overview of its Board Assembly Roadmap Chapter in a webinar prefaced by Grace O’Malley, vice president of global operations. The new chapter is just the latest addition to this global effort from 23 working groups contributing expert input from all aspects of the electronics industry.

Oren Manor on the Siemens-Mentor Integration

11/26/2019 | Real Time with...productronica
In this video interview, part of the productronica coverage, the I-Connect007 team speaks with Oren Manor, director of business development for Siemens, in the Siemens booth. Oren introduces us to the in-booth production equipment that integrates factory automation, motion controls, and MES solutions. He points out that the recent effort to automate SMT lines is now expanding into the areas of final assembly, box build, and manual assembly as well.

Meet Zulki Khan, SMT007 Columnist

10/25/2019 | I-Connect007
Meet Zulki Khan, one of our newest SMT007 columnists! Khan’s columns address new frontiers in upcoming manufacturing techniques, including challenges in the marriage of SMT and microelectronics manufacturing and the critical aspects involved.



Copyright © 2020 I-Connect007. All rights reserved.