Indium's Thum to Present at IPC Thailand


Reading time ( words)

Indium Corporation’s Kenneth Thum, Senior Technical Support Engineer, will present Risk of No-Clean Flux Not Fully Dried Under Component Terminations at IPC Thailand on April 26 in Bangkok, Thailand.

Thum’s presentation will discuss a new halogen-free, no-clean SAC solder paste that has been developed to Avoid the Void™ and to address the reliability issues caused by insufficiently dried or burnt-off flux residue.

Thum provides technical support and process troubleshooting expertise to Indium Corporation’s customers. His experience involves delivering yield improvements and enhanced supplier quality. Thum earned his bachelor’s degree in computer-aided design and computer-aided manufacturing from the University of Malaya. Additionally, he is an SMTA-certified process engineer.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, thermal management, and solar markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com or email abrown@indium.com. You can also follow our experts, From One Engineer To Another® (#FOETA), at www.facebook.com/indium or @IndiumCorp.

Share

Print


Suggested Items

Solder Paste Printing From the Stencil’s Perspective

02/19/2020 | I-Connect007 Editorial Team
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

Solder in PCBA: Can’t Live Without It... or Can We?

02/17/2020 | Joe Fjelstad, Verdant Electronics
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.



Copyright © 2020 I-Connect007. All rights reserved.