KIC to Present during ACI Technologies’ Third Annual Tech Expo


Reading time ( words)

KIC today announced that Robert Baxter, Service Manager, will present during ACI Technologies’ Third Annual Tech Expo, scheduled to take place April 27-28th at its facility in Philadelphia, PA.  Baxter will present “Making Ovens Smarter.”

Profiling is a necessity to manufacture quality products in the reflow and wave solder process.  Baxter will demonstrate ways to simplify this task, reduce setup and oven changeover.  Learn what tools are available to develop connectivity for the oven to share process data with MES systems and others, plus more.

Baxter has been with KIC for 19 years. He has been in the electronics industry for 26 years, both in Europe and the US. Baxter has extensive experience in both reflow and wave soldering.

He is based in the US in Georgia and supports KIC’s team in the Americas and Europe. Baxter is bi-lingual – in addition to English, he is fluent in German.

The free event will include live equipment demonstrations and technical sessions. To register for ACI’s Third Annual Tech Expo, click here.

For more information, click here.

About KIC 

Based in San Diego, KIC is the industry leader in automated thermal process tools and systems for reflow, wave, curing and semiconductor thermal processes. The company pioneered the development of oven profilers and process optimization tools, and then worked to create the next generation of thermal systems to help manufacturers improve the thermal process quality while reducing cost.

KIC products include the KIC K2, X5, KICstart2, ProBot, 24/7 Wave and the KIC RPI. With the introduction of cutting edge tools, the company continues to stay on the leading edge of process optimization and automatic thermal process systems, and has won numerous industry awards.

Share

Print


Suggested Items

Solder Paste Printing From the Stencil’s Perspective

02/19/2020 | I-Connect007 Editorial Team
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

Solder in PCBA: Can’t Live Without It... or Can We?

02/17/2020 | Joe Fjelstad, Verdant Electronics
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.



Copyright © 2020 I-Connect007. All rights reserved.