Indium Corporation Expert Presents at SMTA ICSR 2016


Reading time ( words)

Indium Corporation’s Brook Sandy-Smith, Technical Support Engineer for PCB Assembly Materials, will present at the International Conference on Soldering and Reliability (ICSR) 2016 on May 9-11 in Toronto, Canada.

Sandy-Smith will present How Stencil Design and Reflow Profiles Affect Variation in QFN Voiding Data: A Case Study. This presentation will include data from several studies that demonstrate how stencil design and reflow profile optimization impacts voiding levels and variation in material comparison testing. 

Sandy-Smith is a Technical Support Engineer, specializing in printed circuit board assembly materials, particularly solder paste. She conducts application testing and qualifications for new product introductions. Sandy-Smith earned degrees in chemical engineering (with a focus on materials) and German language from the University of Rhode Island. She previously worked in R&D, developing conductive adhesives for die- and strap-attach, as well as conductive inks for RFID applications. Her areas of expertise include analytical testing of conductive materials, applications such as screen-printing and jet dispensing (jetting), as well as scale-up and pre-production of developmental materials.

The SMTA is an international network of professionals who build skills, share practical experience, and develop solutions in electronics assembly technologies, including microsystems, emerging technologies, and related business operations.  

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, thermal management, and solar markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

Share

Print


Suggested Items

Solder Paste Printing From the Stencil’s Perspective

02/19/2020 | I-Connect007 Editorial Team
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

Solder in PCBA: Can’t Live Without It... or Can We?

02/17/2020 | Joe Fjelstad, Verdant Electronics
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.



Copyright © 2020 I-Connect007. All rights reserved.