Dymax Introduces Multi-Cure 9451 Conformal Coating


Reading time ( words)

Dymax has announced the release of its newest conformal coating- Multi-Cure 9451. This “true” black material- a single-component, 100% solids, light and heat curable conformal coating- is designed to enhance security on PCBs. In addition to its ability to improve circuit reliability in harsh conditions, its opaque black color is intended to cover markings, labeling, other identification as well as sensitive information on the circuit board. 

Formulated with a secondary heat cure, 9451 can typically be applied and cured at up to 5 mils thick- in one pass- for applications where shadow areas exist. It’s easily dispensed and for thicker coating requirements the material can be applied in multiple passes. It becomes immediately tack free after curing, helping to avoid handling defects such as fingerprints that may be left on the boards if they are handled too soon, or other damage caused by stacking and arranging the printing boards during processing. Moreover, this multi-cure material can be applied to a variety of substrates including glass reinforced epoxy laminates, glass and stainless steel with a good bond. In essence, the 9451 coating has been developed to cover sensitive information, yet it not will destroy the board surface if removed. This product is in full compliance with RoHS Directives 2002/95/EC and 2003/11/EC.

Dymax 9451 is yet another addition to the Dymax Conformal Coatings product line, which includes UV/Heat-Curable as well as UV/Moisture-Curable materials in a range of viscosities, all providing circuit board protection and shadow-curing capabilities.  Their ability to cure in seconds enables faster processing, greater output, and lower processing costs.  When cured with Dymax light-curing spot lamps, focused-beam lamps, or flood lamps, they deliver ideal speed and performance.  Dymax lamps offer the ideal balance of UV and visible light for the fastest, deepest cures.

About Dymax

Dymax Corporation develops innovative oligomer, adhesive, coating, dispensing, and light-curing systems for applications in a wide range of markets.  Major markets include aerospace, appliance, automotive, electronics, industrial, medical device, and metal finishing.

Share




Suggested Items

Exploring High Density With Axiom

05/06/2022 | I-Connect007 Editorial Team
Nolan Johnson and Barry Matties talk with Axiom’s Rob Rowland and Kevin Bennett about the current high-density challenges facing EMS manufacturing. In this interview, Bennett and Rowland zero in on component packaging and feeder technology as critical areas in need of improvement.

The Reality of Regulated Manufacturing

04/12/2022 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Ryan Bonner, CEO of DEFCERT, about government regulations for data and cybersecurity. A key component of moving to a digital factory will be to ensure security of the data required to operate a digital factory, and most importantly, customer design data.

Dave Hillman on Living Your Passion

03/29/2022 | Barry Matties, I-Connect007
Barry Matties leads this engaging retrospective conversation with Dave Hillman, a Fellow, Materials and Process engineer at Collins Aerospace, who talks about mentorship, pandemic changes, and solder. “Soldering is soldering,” Dave says. “But how we do that keeps evolving in response to the new technologies and smaller packages.” What’s the key to his success and longevity? “Find your passion.” Here’s how he’s done it.



Copyright © 2022 I-Connect007. All rights reserved.