Electrolube’s FPC Gains UL94V-0 Approval


Reading time ( words)

Electrolube, global electro-chemicals manufacturer recently formulated and launched a brand new Conformal Coating product, (FPC). This material was specially developed to resolve a number of longstanding  problems relating to coverage and connectivity experienced by a specific user of surface modifier materials. The product has been received particularly well and has now just been awarded UL94V-0 approval, further advancing the proposition.   

The potential processing benefits from Surface Modifier Coatings compared to conventional Conformal Coating arise from the combination of required coating thickness (2µm) and very low film strength (abrasion resistance). Users of surface modifier coatings can completely coat a PCB and connectors without masking as when the male and female contact surfaces are joined, the abrasion forces during insertion should cleanly remove the coating material allowing electrical contact.

During development, Electrolube focussed on some key product characteristics that were not only deemed desirable, but essential. The brief was to address the customer’s longstanding issues and develop a non-flammable, ultra-thin coating with an extremely quick touch dry time (1-5 minutes at 20oC), incorporate a UV trace for ease of visibility and overall facilitate a simple coating procedure. Following development, FPC was subjected to a stringent testing regime, (including salt mist, humidity and mixed corrosive gas testing) and passed with flying colours. Extensive connectivity testing was also undertaken to address the connectivity issues and noticeable improvements were recorded. Overall, the new FPC coating resulted in a significant cost saving for the customer. The recent UL940V-0 approval has improved the product yet further. 

Ron Jakeman, Managing Director of Electrolube, comments: "The development, testing and recent UL approval for FPC is a prime example of Electrolube's dedicated approach to solving problems. With a strong emphasis on both research and collaboration, we are continually developing new products, such as the FPC coating and ensuring that they are absolutely the best products for the application required.”

About Electrolube

Electrolube, a division of H.K. Wentworth Limited, is a leading manufacturer of specialist chemicals for electronics, automotive and industrial manufacturing.  Core product groups include conformal coatings, contact lubricants, thermal management materials, cleaning solutions, encapsulation resins and maintenance and service aids.

The extensive range of electro-chemicals at Electrolube enables the company to offer a ‘complete solution’ to leading manufacturers of electronic, industrial and domestic devices, at all levels of the production process. Through collaboration and research, the company is continually developing new and environmentally friendly products for customers around the world and their commitment to developing ‘greener’ products has been endorsed by the ISO 14001 standard for the highly efficient Environmental Management System in place at the company.

Electrolube is represented in over 55 countries with an established network of subsidiaries and distributors. By offering genuine security of scale and a reliable supply chain, the company is able to deliver a truly tailored service.

Share

Print


Suggested Items

Approaches to Overcome Nodules and Scratches on Wire-Bondable Plating on PCBs

07/17/2019 | Young K. Song and Vanja Bukva, Teledyne Dalsa Inc., and Ryan Wong, FTG Circuits
Initially adopted internal specifications for acceptance of printed circuit boards (PCBs) used for wire bonding was that there were no nodules or scratches allowed on the wirebond pads when inspected under 20X magnification. This paper details if wire bonding could be successfully performed over nodules and scratches and if there was a dimensional threshold where wire bonding could be successful.

Cavity Board SMT Assembly Challenges (Part 1)

06/26/2019 | By Dudi Amir and Brett Grossman, Intel Corp.
The concept behind Component-in-Cavity (CiC) is straightforward. If the tallest component(s) on the motherboard can be placed into a recession created in the motherboard, their thickness relative to the components on the surface of the PCB will thus effectively be reduced. While this concept may be straightforward, its implementation is not. That implementation is the focus of this paper. Read on.

Reliability of ENEPIG by Sequential Thermal Cycling and Aging

11/06/2017 | Reza Ghaffarian, Jet Propulsion Laboratory, California Institute of Technology
Electroless nickel/electroless palladium/immersion gold (ENEPIG) surface finish for PCBs has now become a key surface finish that is used for both tin-lead and lead-free solder assemblies. This article presents the reliability of LGA component packages with 1156 pads assembled with tin-lead solder onto PCBs with an ENEPIG finish and then subjected to thermal cycling and then isothermal aging.



Copyright © 2020 I-Connect007. All rights reserved.