AIM Introduces New J8 No Clean Jetting Solder Paste

Reading time ( words)

AIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce the introduction of J8 No Clean Jetting Solder Paste. AIM has specifically formulated J8 No Clean Jetting Solder Paste for use in collaboration with a variety of jetting paste equipment manufacturers.                                                         

AIM’s J8 Jetting Paste has proven to provide consistent solder deposits as small as 200μm. J8 is fully compatible with all AIM no clean solder pastes for use in applications where combining jetted paste deposits with printed paste deposits is required.  J8 has a novel activator system providing powerful, durable wetting action accommodating a wide range of profiles producing bright shiny joints without graping defects.  J8 has reduced voiding to as low as

The development of J8 No Clean Jetting Solder Paste is another example of AIM’s commitment to engineering state of the art products to address emerging PCBA manufacturing technologies.

 About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products including solder paste, liquid flux, cored wire, bar solder, epoxy, lead-free and halogen-free solder products. A recipient of many SMT industry awards, AIM is strongly committed to innovative research and development as well as providing customers with superior technical support, service and training.  




Suggested Items

Real Time with…SMTAI 2020: KYZEN on How Maximized Stencil Life Improves Yields

09/16/2020 | Real Time with...SMTAI
KYZEN Executive Vice President Tom Forsythe shares company updates on stencil cleaning with Nolan Johnson. KYZEN recently announced its newest stencil cleaning product—KYZEN E5631. Forsythe details how the product is best used, as well as the benefits it brings to maximizing stencil life and improving manufacturing yields.

Just Ask Eric: Selecting the Right Lead-Free Solder for Your Application

09/15/2020 | I-Connect007 Editorial Team
First, we asked you to send in your questions for Happy Holden and Joe Fjelstad in our “Just Ask” series. Now, it’s Eric Camden’s turn! A regular SMT007 columnist, Eric is a lead investigator at Foresite Inc., an analytical testing and consulting laboratory. As a reliability expert, Eric has worked with many large OEMs and contract manufacturing companies to optimize their manufacturing processes and assist with the identification of electronic hardware failures utilizing various analytical techniques. He also specializes in optimizing PCBA processes and identifying hardware failures through analysis. We hope you enjoy “Just Ask Eric.”

Just Ask Joe: The Occam Process

08/25/2020 | I-Connect007 Editorial Team
First, we asked you to send in your questions for Happy Holden. Now, it’s Joe Fjelstad’s turn! Inventor, columnist, instructor, and founder of Verdant Electronics, Joe has been involved with rigid PCBs and flexible circuits for decades, and he’s ready to share some of his knowledge with our readers. We hope you enjoy “Just Ask Joe.”

Copyright © 2020 I-Connect007. All rights reserved.