-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Sensible Design: Coatings—Five Essentials for Designers
June 28, 2016 | Phil Kinner, ElectrolubeEstimated reading time: 2 minutes
As I sit down to write my fourth column on the subject of conformal coatings, I’m reminded—as we in the UK continue to experience almost sub-arctic weather conditions this Spring, including snow in April—that it is always best policy to be prepared for those unexpected environmental elements. And where electronic circuit board protection is concerned, that means being prepared for all eventualities. So, as the central heating is fired up a notch or two and the barbecue stove is wheeled back into the garage, let’s consider what we’ve covered so far on the subject of conformal coatings.
True to form, I’ll be providing five PCB design pointers each month to help you avoid some common pitfalls when applying conformal coatings. We have so far looked at tricky production related issues that could so easily have been resolved at that all-important design stage, examined some of the more common dos and don’ts; those are issues that come up time and time again, despite meticulous attention to design detail, and which must be taken into consideration when coatings are finally applied. We’ve explored the implications of housing design on conformal coating performance, particularly the influence that fixtures and fittings can have in terms of thermal shock loading and the adverse effects of forced air cooling when abrasive particles are present. So, let’s cover how the physical shape of board components and the interaction with solder paste, solder masks and fluxes can affect conformal coating integrity.
The focus for this month will be my absolute essential facts—my “Never leave home without them” list, so to speak!
Fact 1: In an ideal world, PCB designs would not have an inherent weak point for corrosion; unfortunately, in the real world, they do. A really neat way of determining this weak point is to use stress tests such as powered condensation tests. When a weak point is revealed, you are better equipped to deal with it. Often the spacing of components, board finish and distance to ground planes can be optimised for corrosion resistance.
Once the design is optimised for corrosion resistance, the conformal coating will often be even more effective in ensuring corrosion free operation. Stress tests (thermal shock, for example) are not intended to be used on final assemblies for product validation. Failure mechanisms may well be different, and may be missed by stress tests. Product validation testing should mimic end use environments as closely as possible. (Here at Electrolube, our testing is designed to push products even further than in actual usage scenarios.)
To read this entire article, which appeared in the May 2016 issue of The PCB Design Magazine, click here.
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.