VJ Electronix to Present at the PHASE 4 Arizona Show & Tell Technical Conference

Reading time ( words)

VJ Electronix Inc., the leader in rework technologies and global provider of advanced X-ray inspection systems, announced plans to participate in the PHASE 4 Inc. Arizona Show & Tell Technical Conference, scheduled to take place August 9–11, 2016 at TechShop in Chandler, Arizona. VJ Electronix will give three presentations during the event, in addition to exhibiting the XQuick II with AccuCount Technology.

The first presentation, entitled “XQuik with AccuCount Technology” will elaborate on how the system uses X-ray imaging to quickly and accurtely count components stored on tape-and-reel. Reduced counting times yield significant labor cost savings while expediting return of valuable inventory.

VJ Electronix also will present, “Advanced Rework Techniques,” which will explore how new components, both large and small, have created a new set of rework challenges.  This presentation will describe new techniques and process tooling developed to address unique thermal management and component handling issues.

The third presentation entitled, “Evolution of X-ray Inspection in the Electronics Industry,” will decribe why X-ray inspection has become a more important step in process and quality control.  Significant advances in technology have lead to a variety of techniques used on the production floor as well as the failure analysis lab.

About VJ Electronix

VJ Electronix, Inc. manufactures production ready, automated Rework and X-ray inspection systems with many advanced capabilities. The company frequently provides custom solutions tailored to satisfy specific application requirements. VJ Electronix is a worldwide leader in X-ray Inspection and Rework equipment.



Suggested Items

Discover the Benefits of a Technology Center

10/23/2019 | Barry Matties, I-Connect007
Nico Fahrner, application engineer at Rehm Thermal Systems, talks with Barry Matties about the benefits prospective customers get from being able to fully test their systems in-line at Rehm’s technology centers before purchasing.

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Recent Advances in X-ray Technology: SMTA Webinar Recap

08/12/2019 | Pete Starkey, I-Connect007
Technical Editor Pete Starkey recently attended a webinar on advances in X-ray technology and its applications in the electronics industry, as presented by Keith Bryant, Chair of SMTA Europe, on behalf of SMTA India. Here are the highlights of the webinar.

Copyright © 2020 I-Connect007. All rights reserved.