Creative Materials Announces New Thermally Conductive Interface Material


Reading time ( words)

Noelle Industries, a division of Creative Materials, Inc, has introduced 804-24, a one-component thermally conductive thermal grease that has excellent heat dissipation properties, low sag and no bleeding.

The 804-24 is designed to dissipate heat away from sensitive electronic components including semi-conductors and temperature sensing devices.

This product is white in color with a silicone-based filler system and has excellent aging characteristics at temperatures up to 200°C.  This product has a volume resistivity of 2.0 x 1015 ohm/cm, dielectric strength of 450 volts/mil and thermal conductivity of 8.2 W/m*K.

The Noelle Industries division develops specialty-formulated epoxies, urethanes, silicones and UV-curable acrylic materials that are widely used in the aerospace, automotive, electronics, mechanical assembly and other OEM markets.

About Creative Materials, Inc.

Creative Materials, Inc., is a leading manufacturer of custom-formulated electrically conductive inks, coatings, and adhesives.  Products from Creative Materials are used in a variety of applications that provide cost-effective design solutions for demanding production requirements. Creative Materials is ISO 9001 and ISO 14001 certified. Our company has extensive experience in the adhesive, ink and coating industry, combining technical expertise with nimble production capabilities, enabling us to reduce time-to-market for new product applications.  Please contact Creative Materials at 1-800.560.5667, or email us @ info@creativematerials.com, to discuss your specific application needs.

Share

Print


Suggested Items

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

Reliability Testing in Automotive and Digital Factories

12/11/2019 | Barry Matties, I-Connect007
Barry Matties spoke with Gen3’s Andrew Naisbitt about what readers should know about SIR and CAF testing, what to consider if you’re thinking of bringing it in-house, and how reliability testing fits into automotive and the digital factory.



Copyright © 2020 I-Connect007. All rights reserved.