Indium's Eric Bastow to Present at 2016 Medical Electronics Symposium


Reading time ( words)

Indium Corporation’s Eric Bastow, Assistant Technical Manager for the Americas, will present at 2016 Medical Electronics Symposium on Sept. 14-15 in Portland, Oregon. As no-clean soldering processes continue to dominate the electronics manufacturing world, ever-increasing miniaturization is putting pressure on solder paste manufacturers to produce solder pastes that can reliably print through smaller and smaller stencil apertures.

Bastow’s presentation provides an answer to the question: Does Solder Particle Size Impact the Electrical Reliability of a No-Clean Solder Paste Flux Residue? Bastow uses IPC J-STD-004B SIR (Surface Insulation Resistance) testing to determine if there is a measurable impact on the electrical reliability and, if so, is it substantial enough to be a cause for concern?

Bastow provides technical support for Indium Corporation’s full range of solder products for the electronics assembly, semiconductor packaging, and thermal management markets to customers throughout the Americas. He is an SMTA-certified process engineer and has earned his Six Sigma Green Belt from the Thayer School of Engineering at Dartmouth College, Hanover, NH.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, thermal management, and solar markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

Share

Print


Suggested Items

SMTAI 2019: Chris Bastecki on Low-temperature Solder Challenges and Products

10/14/2019 | Real Time with...SMTAI
Chris Bastecki, director of global PCB assembly at Indium Corporation, discussed challenges of low-temperature solder and the company's new product, Durafuse LT, which provides novel properties and reliability.

Real Time with... SMTAI 2019 Video Interviews

10/09/2019 | Real Time with...SMTAI
The SMTA International Conference and Exhibition 2019, which took place September 22–26, 2019, at the Donald E. Stephens Convention Center in Rosemont, Illinois, concluded successfully. For those of you who were not able to make it to the show, catch our video interviews with the movers and shakers of the electronics industry. We've updated our video presentation for a better experience for our users, so check it out!

SMTAI 2019: Happy Holden’s On-the-Scene Report

10/03/2019 | Happy Holden, I-Connect007
Last week concluded the 2019 SMTAI conference in Rosemont, Illinois. Overall, I think the show was successful and covered all aspects of SMT processes.



Copyright © 2019 I-Connect007. All rights reserved.