Manncorp’s 4040 Makes Vapor Phase a Viable Alternative to Inline Convection


Reading time ( words)

Continuing in its 50-year tradition of innovation and value, Manncorp introduces the new 4040 Vapor Phase Soldering System — a new generation of vapor phase that allows SMT assemblers to easily and affordably capitalize on this trusted technology’s numerous advantages.  Superior soldering quality, instant product changeovers, and 0% risk of overheating are just a few reasons vapor phase systems like the 4040 are, for many, a much better option than inline convection ovens.  This is especially true for manufacturers of high component-mix assemblies with BGAs and other complex SMDs, where uniform soldering temperatures and long-term product reliability are critical.  No longer just a niche technology for military, avionics, medical, and other hi-rel applications, the 4040 is taking vapor phase mainstream. 

Designed for today’s sustainable manufacturing facility, the compact 4040 Vapor Phase installs easily in virtually any workspace, without the need for complex ductwork and external venting.  The efficient heat transfer and gentle conditions of the vapor phase process generate minimal exhaust which is easily managed by any low-cost, self-contained, fume extraction system.  With a power rating of less than 3 KW (75-80% less than even the smallest convection ovens), dramatically lower electric bills will also contribute to the 4040’s fast payback. 

A multi-chamber design and automatic board handling system make the 4040 extremely easy and economical to operate.  The illuminated processing chamber, which includes a large 14" viewing window, is completely isolated during soldering and a fluid recovery system collects and filters condensate during cooldown.  Cycle times ranging from 6-9 minutes or less and an extra-large (18" x 16") work holder allow batch soldering of multiple boards for throughput that easily supports low- to medium-volume production requirements.

Soldering programs can be created automatically in seconds without any danger to boards or components and without time-consuming profiling.  Programs can be fine-tuned for increased efficiency and energy savings, if desired, through the use of an included thermocouple connector accessory that allows monitoring of actual board temperature throughout the soldering cycle.  Thermal profile data can also be recorded, saved, and exported through the built-in SD card slot for SPC traceability.  For more information, click here.

For five decades, Manncorp has supplied electronics manufacturers with the world’s best values in PCB assembly equipment, direct to the customer, at the industry’s most competitive prices, and with full service and support.  Offices worldwide: East (Huntingdon Valley, PA), West (San Diego, CA), Mexico, Brazil, China.   

Share

Print


Suggested Items

KYZEN’s Tom Forsythe: The Effects of COVID-19

05/15/2020 | Barry Matties, I-Connect007
On May 7, Barry Matties and Tom Forsythe, executive vice president at KYZEN, discussed the effects of COVID-19. During the conversation, Forsythe addressed KYZEN’s strategy to keep the staff and employees healthy as the foremost concern. He also detailed recent changes in interacting with customers and his take on what will be the new long-term changes in how the company does business versus short-term accommodations.

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

I-007e Micro Webinar: Primary Flight Control Case Study on Condensation and Coverage

02/26/2020 | I-Connect007 Editorial Team
The seventh episode of the popular webinar series “Coatings Uncoated!” is now available to view. Author of "The Printed Circuit Assembler’s Guide to Conformal Coatings for Harsh Environments" and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation. If you are in the assembly business, an EMS, or responsible for specifying conformal coating and/or encapsulation, then this free series is for you.



Copyright © 2020 I-Connect007. All rights reserved.