NovaCentrix Expands Solder Capabilities

Stan Farnsworth of NovaCentrix discusses how the company has expanded into electronics manufacturing in the past year with its photonic curing and soldering tools.

2020: A Year of Learning, Innovation for Taiyo America

Pete Starkey has a virtual visit with John Fix, director of Sales and Marketing at Taiyo America, where they discuss the changes taking place because of COVID-19 restrictions, and some of the new products Taiyo will be presenting at this year’s IPC APEX EXPO.

Counseling Startups From Design Through NPI

Andy Shaughnessy and Happy Holden sat down for an interview with Richard Marshall, CEO of Xitex Limited, a company based in the U.K. that provides consultancy to startups launching wired and wirelessly connected products. Richard explains some of the most common factors companies overlook when introducing a new product. He also discusses one startup’s new product—a Fitbit-type device worn by horses—and why he advises startups to “Make your mistakes close to home.”

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.

EPTAC Preparing Young People for Future in Industry

In this video interview from the show, Guest Editor Kelly Dack and Leo Lambert, VP/technical director of EPTAC Corporation, describe the impact of internships and apprenticeships, the importance of IPC specifications, the effectiveness of certification.

Best Practices Highlighted at the 2020 IPC EMS Management Meeting

The key challenge at the top of EMS leaders’ minds during roundtable discussions was the lack of skilled workers. Leaders brainstormed solutions like creative identification and sourcing of talent outside of the manufacturing sphere, leveraging the flexibility of smaller businesses to make changes attractive to potential employees as well as cooperation with IPC and other talent development programs. John Mitchell updated the group on the IPC Education Foundation (IPCEF) and workforce initiatives to build and support workforce needs. The group welcomed Andy Marris of MRA, who discussed motivating and engaging an existing workforce to create a competitive advantage.

Evolving Solder Capabilities for Shrinking Components

Taiyo’s Yuya Suzuki, marketing manager for IC packaging materials, talks with Nolan Johnson and Dan Feinberg about the challenges with soldering due to shrinking components and how Taiyo’s R&D work around smaller filler sizes and increased planarity has been preparing them for the future of solder mask.

IPC APEX EXPO 2020 Attendees Speak: Travis Smith and Mindy Sanchez

"I’m seeing a lot of great manufacturers and different equipment that’s available in the market, as well as new, emerging technologies," said Travis Smith of Ball Aerospace. "I’m learning a lot more about some of IPC’s standards and committees as well. It has been a fantastic week of educating ourselves for manufacturing processes going forward. And the IPC booth has a wealth of information."

Michael Ford Explains the Benefits of IPC-CFX

In this video interview from the show, Guest Editor Dan Beaulieu and Michael Ford, senior director of emerging industry strategy at Aegis Software, discuss the IPC-CFX standard that allows machines to communicate with other machines. They also focus on some strategies that can turn any factory with old or new equipment into a smart factory.

IPC APEX EXPO 2020 Attendees Speak: Victor Mendez

"I’ve seen a lot of new technology that could solve a lot of problems regarding handling and manual soldering," said Victor Mendez of Sigmatron International.

Congratulations to Steve Pudles! IPC Hall of Fame 2020 Inductee

With over 32 years spent working with IPC, Steve Pudles was elected to the IPC’s Hall of Fame this year. Patty Goldman spoke with Steve about how he first became involved as well as his time in the organization, including his work with the EMS Management Council.

The Convergence of 5G and Automotive

Karthik Vijay is head of the applications engineering team for customers in Europe at Indium Corporation. He spoke with Barry Matties about what EMS or assemblers for automotive should consider, as well as how he thinks 5G will affect the marketplace and manufacturing.

CES 2020: The Intelligence of Things

Show week for CES 2020 starts well ahead of the actual exhibition dates because it is huge. The organizers of CES state that there are more than 4,400 exhibiting companies and nearly three million net square feet of exhibit space. On the floor, you can find 307 of the 2018 Fortune Global 500 companies. Over the week, I-Connect007 Editors Dan Feinberg and Nolan Johnson will bring you some of the most interesting news, products, and announcements from 5G to IoT, semiconductor developments, autonomous vehicle technology, interconnect, fabrication materials, and much more.

Engaging STEM Students at IPC APEX EXPO 2020

At this year’s IPC APEX EXPO, you’re likely to see quite a few high school students moving amongst all the normal show activities thanks to the IPC APEX EXPO STEM Outreach Program. Launched two years ago at IPC APEX EXPO 2018, the 2020 version of the STEM Outreach Program will be larger and more immersive than ever before.

What’s the SCOOP: Chinese New Year

Chinese New Year really is an amazing celebration with millions of workers returning to their families for the celebrations. But with the shutdown and mass migration come stress on infrastructure, supply chain and the whole manufacturing and fulfillment ecosystem. I asked a few Industry experts what they thought the key issues are and what advice they’d offer.

PCB Repair: Thoughtful Best Practices

Barry Matties recently spoke with Curtis Smith of Huntron about the critical factors that somebody needs to understand about the plant maintenance regarding the PCB repair process. The PCB repair process is not just a matter of just getting the equipment anymore but finding the right people with a troubleshooting mindset that can do it. A failed PCB can bring down an entire manufacturing line, and companies need to be able to repair the board and keep their manufacturing going.

UV-curable Materials and Conformal Coatings

Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

Book Summary: The Printed Circuit Assembler’s Guide to…Process Validation

The latest book in I-Connect007’s "The Printed Circuit Assembler’s Guide to…" series is authored by Gen3’s Graham Naisbitt. With his deep background in process validation and standards work, Naisbitt is uniquely qualified to explore achieving acceptable electrochemical reliability using both CAF and SIR testing. This eBook is a perfect present for the holidays.

The Future of the World Is Truly in the Hands of Our Youth

At I-Connect007, we are proud to once again sponsor the STEM Outreach Program at the upcoming IPC APEX EXPO 2020. Another way we support our youth is by sharing the stories of young people who are doing amazing things. Dylan Nguyen is a great student, musician, and creative thinker. Recently, he shared with me the details of his school science fair project, “Kite: Powering the Future,” which solved a problem that he faced. Dylan is a leader with a bright future, and the world is lucky to have kids like him.

The Digital Medical Revolution

Zulki Khan, founder and CEO of NexLogic Technologies Inc., offers his unique perspective on manufacturing trends as a PCB turnkey solutions provider based in Silicon Valley. He discusses additional requirements that are now necessary to compete in different industry sectors, most notably medical, which he says is set for a “digital revolution.”

Digi-Key on Adapting to the Changing Industry Landscape, Pt. 1

The I-Connect007 editorial team recently spoke with Chris Beeson, executive vice president of global supplier and new business development at Digi-Key Electronics, about trends and the changing landscape of the industry. Beeson describes how Digi-Key is looking to continue growing its user community as a design service provider while providing greater services for the entire PCB.

Global Political Turmoil Creating Uncertainties for the Industry

From where I sit, representing the interests of electronics manufacturers and related companies around the world, I regret to say that the future of our industry—while bright overall—is fraught with uncertainties, from trade policy disputes to government leadership turnovers and economic and social megatrends. IPC is working with all governments and parties to overcome these uncertainties, but there is a lot to tackle.

Merger and Acquisition Trends

In this interview with the I-Connect007 Editorial Team, Green Circuits’ Joe O’Neil breaks down the current merger and acquisition (M&A) market in the electronics manufacturing space and the industry trends that affect it. Joe also gives his advice on best practices for the negotiating table from both the buyer’s or seller’s perspective.

Explaining the QSFP-DD Data Center Interconnect Standard

According to Cisco’s report, most IP traffic either originates or terminates in data centers. Yet as massive as the flows between centers are becoming, the data managed within those same facilities is going even higher. All of this activity means that “hyperscale” is the word of the future. Roughly one-quarter of all servers installed in 2016 went to hyperscale facilities, but that number will grow to almost one-half by next year.

Meet Ray Prasad, SMT007 Columnist

Meet Ray Prasad, one of our SMT007 columnists! Prasad’s columns explore DFM, manufacturing processes, yield improvement, quality control, IPC standards, and much more.

The Changing Landscape

SMTAI featured two keynote speakers: Adam Steltzner, a NASA Jet Propulsion Laboratory (JPL) engineer who led the Mars Science Laboratory's Entry, Descent, and Landing (EDL) Phase for the Curiosity rover and the chief engineer for the Mars 2020 Project; and Dr. Mike Hawes, Lockheed Martin Vice President for Human Space Exploration and Orion Program Manager. The energy at both keynotes was palpable. We’re returning to extra-orbital space with human crews, and the demands of such missions drive innovation.

SMTAI 2019: SAFI-Tech's No-Heat SAC305—A Possible Gamechanger

Ian Tevis is CTO and founder of SAFI-Tech, a startup focusing on SMT solutions. He explains how he founded SAFI-Tech right after college and details the benefits of the company's first product, No-Heat SAC305.

SMTAI 2019: Creative Electron's Mobile X-ray Van and LED-specialized Equipment

Nolan Johnson and CEO Bill Cardoso discuss Creative Electron's new equipment that specializes in LED applications and the company's X-ray van—the "mobile trade show" and demo platform.

Real Time with… SMTAI 2019 Slideshow

The SMTA International 2019 Conference and Exhibition closed last week on a high note. For those who were not able to attend the event, held at Stephens Convention Center in Rosemont, Illinois, the slideshow contains a selection of photos from the exhibition show floor as well as the conference.

Five Key Components of an NPI Report

An NPI report is an opportunity for your contract manufacturer to highlight any outstanding issues that will need to be addressed for future builds. The information that your EMS partner provides can play a pivotal role in ensuring that they continue to deliver your products on time, within budget, and to the highest quality standards.

Mentor and Seica Partner for Data Prep and Testing Big Boards

Mark Laing, business development manager of the Valor division at Mentor, a Siemens company, and Luca Corli, director of sales at Seica, speaks with I-Connect007 Technical Editor Pete Starkey about the partnership between their two companies, which enables efficient data preparation for testing big boards, and accelerates new product introduction (NPI) cycles.

Shopping at IPC APEX EXPO: Evolutionary or Revolutionary Products?

As you're finalizing your shopping list, take a second to consider this: Are you in the market for products that are evolutionary or revolutionary? And what do those terms even mean for someone looking for new DFM software or a new pick-and-place machine?

Real Time with...SMTAI 2018 Coverage Now Available

The I-Connect007 team traveled to Rosemont, Illinois this week to cover the SMTA International 2018 conference and exhibition. Video interviews of key executives and leaders of our industry are now available for viewing. Also check out the photo gallery for snapshots of the exhibition floor and the conference as well as the after-hours festivities.

RTW NEPCON South China: Mycronic Discusses Industry 4.0

At the recent NEPCON South China 2018 event in Shenzhen, Clemens Jargon, VP for Global Dispensing and Asia at Mycronic, discusses I-Connect007's Edy Yu the challenges that customers face on their journey towards Industry 4.0, and how Mycronic is addressing these issues. From jet printing to solder paste inspection, to pick-and-place, Jargon talks about their total solutions that aim to help customers take their production to the next level.

Seeing Clearly: XR Headsets and Flex’s Reference Design at AWE

At this year’s CES, they announced the launch of an extended reality (XR) reference design for the next generation of XR headsets. As the “sketch-to-scale” solutions provider, as they describe themselves, that designs and builds “intelligent products for a connected world,” they have now introduced an augmented reality (AR or, as we now call it, XR) reference design to reduce time to market for companies wishing to make and market XR devices.

NEPCON South China 2017 Opens Today

NEPCON South China 2017, being held in conjunction with the Shenzhen Circuit Sourcing 2017 and Automotive World China, opens its doors today at the Shenzhen Convention and Exhibition Center to showcase nearly 600 companies catering to the electronics manufacturing industry. This year’s event, the largest ever in the show's 30-year history, features 45,000 square meters of exhibition space.

Assembly Training and Education

Even if your PCB assembly process is optimized, there is always room for improvement. And no matter how successful your company has been in the past, you just can’t rest on your laurels. It is always in your best interest to strive towards a better operations model. We've created a survey to help us gauge the importance of training and education in your workforce, and the benefits that you get in ensuring that your operators and engineers have the most current knowledge and skill sets.

Business and Technical Developments at Super Dry Totech

At the recent SMT Hybrid Packaging show in Nuremberg, Germany, I-Connect007 Technical Editor Pete Starkey visits Super Dry Totech and spends a few minutes with CEO Jos Brehler and Sales Manager Terry Morgan to talk about the rationale behind ASYS Group's acquisition of stake in Super Dry Totech, as well as the latest technology developments happening at the company.

RTW NEPCON China: Metcal Highlights Innovation in Hand Soldering Technology

At NEPCON China, Bryan Gass, vice president of Metcal, discusses how their Connection Validation soldering station will revolutionize the hand soldering technology industry.

Dry Storage Cabinets' Role in Industry 4.0

At IPC APEX EXPO 2017, Rich Heimsch, Super Dry’s Director of the Americas, discusses the electronics manufacturing industry’s different versions of Industry 4.0, and his company's strategies in dealing with all of them. He also talks about Super Dry's latest storage developments.

RTW IPC APEX EXPO: Indium’s Eric Slezak Talks Project 99

Indium Corporation's Eric Slezak talks with I-Connect007 Guest Editor Steve Williams about the launch of their new Project 99 wave solder process flux system. Indium has created an exciting new spin on this technology by using a comic book theme, with "villains" representing common wave solder defects and "superheroes" representing their flux solutions to combat the problems.

Metcal Brings Big Science and High Reliability to Hand Soldering

Recently, Judy Warner visited the Metcal facility in Southern California and meet with Product Support Engineer Robert Roush. They talked about Metcal's patented hand-soldering technology, which promises to bring a new level of science and control to the world of hand-soldering.

The Industry Speaks

In the latest issue of SMT Magazine, we take a pause from covering the latest technology trends, challenges, and solutions in the electronics manufacturing and assembly industry. Instead, we are focusing on our readers—to give a voice to their thoughts on the industry, companies, jobs, interests, and even pain points when it comes to their respective specialties.

Rapid Prototyping is a Fiscal Game Changer

When done right, rapid prototyping can increase an OEM's top-line revenue and extend their product lifecycles by ensuring that their product features at launch are actually the features their customers need.

New Paradigms

While the latest technology innovations bode well for the electronics industry, they also offer many challenges in terms of the way products are being manufactured. The latest issue of SMT Magazine features "what's new" in the electronics assembly industry, and discusses how they are addressing current manufacturing challenges.

EMS: Quo Vadis? (Where are You Going?)

In an industry that is constantly changing, EMS providers have reinvented themselves to stay relevant and fuel profitable growth. In this article, Integrated Micro-Electronics Inc.'s Frederick Blancas talks about five of the many transformation trends happening in the EMS industry, and how they are pushing the industry to continue to evolve, progress and advance.

Medical EMS: Opportunities Abound

Megatrends such as the increasingly ageing population and growing demand in emerging economies worldwide bode well for the medical electronics assembly industry. However, challenges such as margin pressures, compliance costs and risks, supply chain instability, and new product introduction headaches are hindering a more aggressive prognosis of the industry. But, with innovation, medical manufacturers can churn out more.

Medical Electronics: Manufacturing Vitals

With the rapidly growing aging population, rising healthcare costs and increasing health awareness, opportunities abound in consumer medical devices, diagnostics, imaging, and instrumentation. However, the medical electronics industry is not without its own set of challenges. The January 2016 issue of SMT Magazine highlights the manufacturing challenges and opportunities in this growing sector.

The New Industrial Era

Key transformative technologies such as big data, analytics, and IoT are ushering in a new industrial era, where new technology forces and innovations are changing the dynamics, risks, and success factors for global manufacturing companies. To be successful in this environment, a mindset shift is required when it comes to deciding what to do and how to take your manufacturing operations to the next level.

Surface Mount Technology Association—a New Milestone

With a grand mission, SMTA is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations. The organization delivers the right information at the right time to empower the workforce, who collectively advances technology, innovates new products, and serves the global industry.

NEPCON Shenzhen 2015 Puts Spotlight on China's EMS Industry

From ODM and OEM to EMS, the Chinese electronics manufacturing industry is transforming from single, passive processing to active, intelligent manufacturing—in line with the "Made in China 2025" plan, as well as the latest trends happening in the electronics industry.

BGA or CGA: When Is It Right for You?

In this interview with TopLine President and Founder Martin Hart, I-Connect007 Publisher Barry Matties focuses on column grid array (CGA) and how CGA can solve delamination problems. CGAs, also known as CCGA, are not necessarily new but are making a strong comeback in the high reliability market.

Solder Jet Printing: Is It the Right Time?

Publisher Barry Matties gets an update from Nico Coenen, sales director for Mycronic, on their solder jet printing system. Mycronic has been developing and pioneering this technology for 10 years and they believe now is the time for it to gain real traction. One thing is certain; solder jet printing certainly has advanced and could make a big difference in process and quality.

NEPCON China Showcases Latest Manufacturing Tech in Asia

Considered Asia's biggest, most influential SMT and electronics manufacturing event, NEPCON China 2015 attracted over 450 leading brands from 22 countries, who are showcasing this week the latest electronics manufacturing technologies and products across an exhibition area of 25,000 sqm. I-Connect007 is on hand again this year covering this event with exclusive interviews and photos from the show floor.

Nordson EFD Demos Fluid Dispensing Systems at MD&M

Nordson EFD, a Nordson company, the world's leading precision fluid dispensing systems manufacturer, will demonstrate its new series of automated fluid dispensing systems at MD&M West in Anaheim, California on February 10-12, 2015 in booth #3335. Nordson EFD's new systems combine precise dispensing with fast and easy programming and are easily integrated into any manufacturing operation. These closed-loop systems ensure that the dispensing process stays in control. Customers will benefit fro…

Looking Forward to Day 2

This is the fifth in a series of articles about APEX, held January 22-24, 2002 in San Diego. It provides a guide to the activities of the second day of the show.

Looking Forward to Day 1

This is the third in a series of articles about APEX, held January 22-24, 2002 in San Diego. It provides a guide to activities taking place during the first day of the show.