Lost your password?
Not a member?
Resend confirmation instructions
Sort By Category
- New Technology
- New Products
- Test & Inspection
- Breaking News
- IPC Standards
- Rework & Repair
- From The Show
I-Connect007 Leadership Survey: Valuable Lessons From Grandma
07/10/2020 | I-Connect007 Research Team
Navigating the Current Supply Chain
07/08/2020 | Nolan Johnson, PCB007
Catching Up With Fane Friberg: Supply Chain Management Expert
07/03/2020 | Dan Beaulieu, D.B. Management Group
This Month in SMT007 Magazine—Electronics Manufacturing: A Critical Industry and Supply Chain
07/01/2020 | I-Connect007 Editorial Team
June Issue of SMT007: A Snapshot of a Resilient Industry
06/30/2020 | Tamara Jovanovic, Happiest Baby
SMT :: Interview
Business Practices Drive the Smart Factory, Not the Other Way Around (Pt. 2)
In Part 2 of this conversation, Sagi Reuven— business development manager at Mentor, a Siemens Business—continues his discussion on how smart factory implementations must start with traditional process analysis and improvement before the data capture process is useful.
Industry Outlook With Siemens’ Fram Akiki
In this video interview from the show, Editor Dan Feinberg speaks with Fram Akiki, VP of electronic and semiconductor industries for Siemens, about the biggest challenges in the electronics industry. They also discuss major industry trends, including smart connected devices used in autonomous transportation and robotics, increased complexity, and a reduced time to market.
Congratulations to Steve Pudles! IPC Hall of Fame 2020 Inductee
With over 32 years spent working with IPC, Steve Pudles was elected to the IPC’s Hall of Fame this year. Patty Goldman spoke with Steve about how he first became involved as well as his time in the organization, including his work with the EMS Management Council.
IPC APEX EXPO 2020 Attendees Speak: Dr. Martin Anselm
"The biggest challenge I’ve encountered a number of different times is the migration to much larger packaging," said Dr. Martin Anselm, director of CEMA Lab. "Devices are getting much larger, and with the thousands of I/O of solder joints, and they are not just single-die, multi-chip modules in different forms or 2.5D technologies.
Manncorp: An SMT One-Stop Shop
In this interview, Joe Fjelstad speaks with Ed Stone, sales manager of Manncorp. Ed details the operations at Manncorp’s two locations in San Diego and Philadelphia, including production of LEDs for Manncorp’s daughter companies. As Ed says, describing the steady traffic at his booth, “We have something that everyone at the show needs.”
Phil Carmichael: IPC Asia Continues Solid Growth
Phil Carmichael, IPC president of Asia Pacific, talks with Barry Matties at the HKPCA show during the first week of December 2019 about the continued growth and increased engagement by Asian member companies with IPC, with over 320 members in standards committees now working on the development of the next-generation standards.
I-007e Micro Webinars Releases Part 4 in ‘Coatings Uncoated!’ Series
What is creepage, and how does it impact clearance? Can conformal coatings reduce creepage? The fourth episode of the popular webinar series, Coatings Uncoated, is now available to view. Author of The Printed Circuit Assembler’s Guide to Conformal Coatings for Harsh Environments and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation.
New From I-007e Micro Webinars: Part 2 in ‘Coatings Uncoated!’ Series
Got five minutes? Watch Phil Kinner's the latest segment, Never Underestimate the Importance of the Application Process, which examines the pivotal role that application plays in the overall success of coating, and presents a great opportunity to grasp the importance of the process.
New From I-007e Micro Webinars: The 5-Minute Webinar Series
I-Connect007 takes the on-demand webinar to a new level. A perfect companion to our I-007 Micro eBook series, these bite-sized webinars are released weekly, exclusively at I-Connect007, and are also available all at once for those who can’t wait for the next installment.
Upgrading to a Digital Line
Ridhi Kantelal of Arch Systems breaks down what fabricators considering bringing in digitalization and upgrading their lines should know, and why they may see the most benefit from focusing on the data engineering aspect rather than the actual retrofitting of their systems.
Supply Chain Update and the Impact of 5G
I caught up with Stephanie Martin, senior VP of global supply at Vexos, to talk about the current landscape of the industry from an EMS perspective. Stephanie describes an ongoing technology shift occurring with the industry’s move to smaller case sizes and why it’s in the customer’s best interest to look at the design cycle and go as small as they can on components.
Digi-Key on Adapting to the Changing Industry Landscape, Pt. 1
The I-Connect007 editorial team recently spoke with Chris Beeson, executive vice president of global supplier and new business development at Digi-Key Electronics, about trends and the changing landscape of the industry. Beeson describes how Digi-Key is looking to continue growing its user community as a design service provider while providing greater services for the entire PCB.
Oren Manor on the Siemens-Mentor Integration
In this video interview, part of the productronica coverage, the I-Connect007 team speaks with Oren Manor, director of business development for Siemens, in the Siemens booth. Oren introduces us to the in-booth production equipment that integrates factory automation, motion controls, and MES solutions. He points out that the recent effort to automate SMT lines is now expanding into the areas of final assembly, box build, and manual assembly as well.
Maximising Performance and Reliability of Automotive Electronics With Conformal Coatings
While the value of the electronic systems in a modern vehicle typically exceeds 20% of the total vehicle cost, many estimate that this value will exceed 35% within the next five years. With the increased adoption of electronic vehicles and the development of the internet of things (IoT)—which has brought us driverless cars like those being tested by Google in California and BMW on the roads of Bavaria—the future of this industry is starkly different from that of the 1970s when electronic fuel injection systems were first introduced to mainstream production.
Global Political Turmoil Creating Uncertainties for the Industry
From where I sit, representing the interests of electronics manufacturers and related companies around the world, I regret to say that the future of our industry—while bright overall—is fraught with uncertainties, from trade policy disputes to government leadership turnovers and economic and social megatrends. IPC is working with all governments and parties to overcome these uncertainties, but there is a lot to tackle.
AI Cameras Help Park Rangers Stop Poachers
Eric Dinerstein, the director of biodiversity and wildlife solutions at the non-profit organization RESOLVE, discusses the organization’s TrailGuard AI camera—a low-cost, durable, easy-to-use, efficient, and low-power burglar alarm system for Africa’s national parks—that alerts rangers at headquarters in near real-time of intruders and potential poachers coming into the park. With the help of leading companies, Eric explains how the project came to life, including implementing artificial intelligence (AI) and a satellite modem, making it the first of its kind.
Keith Bryant on Growth in the European Market
Pete Starkey interviews Keith Bryant, chairman of the European division of the Surface Mount Technology Association (SMTA), about his view on the outlook of the industry, including growth in the European electronics manufacturing industry as well as the need for young engineers.
Meet Ray Prasad, SMT007 Columnist
Meet Ray Prasad, one of our SMT007 columnists! Prasad’s columns explore DFM, manufacturing processes, yield improvement, quality control, IPC standards, and much more.
The Changing Landscape
SMTAI featured two keynote speakers: Adam Steltzner, a NASA Jet Propulsion Laboratory (JPL) engineer who led the Mars Science Laboratory's Entry, Descent, and Landing (EDL) Phase for the Curiosity rover and the chief engineer for the Mars 2020 Project; and Dr. Mike Hawes, Lockheed Martin Vice President for Human Space Exploration and Orion Program Manager. The energy at both keynotes was palpable. We’re returning to extra-orbital space with human crews, and the demands of such missions drive innovation.
The Ecosystem of Industry Standards
I-Connect007 reached out to representatives from several industry standards organizations and talked with them about how they participate in the standards process. Along the way, these conversations clarify which group does what, how they all work together as well as clarify and dispel a couple of industry myths.
SMTAI 2019: Carmichael Gugliotti Discusses His First SMTAI Paper
Carmichael Gugliotti, process specialist at MacDermid Alpha Electronics Solutions, discusses his first STMAI paper presentation with Andy Shaughnessy. Gugliotti's paper focuses on periodic pulse plating of mid-aspect ratio PCBs.
SMTAI 2019: SAFI-Tech's No-Heat SAC305—A Possible Gamechanger
Ian Tevis is CTO and founder of SAFI-Tech, a startup focusing on SMT solutions. He explains how he founded SAFI-Tech right after college and details the benefits of the company's first product, No-Heat SAC305.
SMTAI 2019: MIRTEC's Newest Product Introduced at SMTAI
Brian D'Amico, MIRTEC president, updates Nolan Johnson on the healthy business environment on the show floor and the company's new product that was introduced at SMTAI. D'Amico also shares his view on industry challenges providing connectivity for smart factory productivity.
SMTAI 2019: KIC's New, Smart Factory Products
MB Allen, manager of applications and sales for KIC, and Karl Pfluke, regional sales manager, update Nolan Johnson on their new product announcement from earlier this year. They also address the company's ongoing work on smart factory products.
Chuck Bauer: SMTAI 2019 Founder's Award Recipient
At the recent SMTAI conference and exhibition, Chuck Bauer, Ph.D., senior managing director at TechLead Corporation, received the Founder's Award, a prestigious award given to a member who has made exceptional contributions to the industry and provided ongoing support and service to the SMTA.
SMTAI 2019: Chris Bastecki on Low-temperature Solder Challenges and Products
Chris Bastecki, director of global PCB assembly at Indium Corporation, discussed challenges of low-temperature solder and the company's new product, Durafuse LT, which provides novel properties and reliability.
SMTAI 2019: Company Updates and Future J-STD-001 Changes
Nolan Johnson speaks with Graham Naisbitt, chairman and CEO of Gen3 Systems, and Andy Naisbitt, operations director, about how they just signed an agreement with a new distributor. Graham also discussed upcoming J-STD-001 changes and Gen3's shift to a more consultative customer model.
SMTAI 2019: Creative Electron's Mobile X-ray Van and LED-specialized Equipment
Nolan Johnson and CEO Bill Cardoso discuss Creative Electron's new equipment that specializes in LED applications and the company's X-ray van—the "mobile trade show" and demo platform.
Real Time with... SMTAI 2019 Video Interviews
The SMTA International Conference and Exhibition 2019, which took place September 22–26, 2019, at the Donald E. Stephens Convention Center in Rosemont, Illinois, concluded successfully. For those of you who were not able to make it to the show, catch our video interviews with the movers and shakers of the electronics industry. We've updated our video presentation for a better experience for our users, so check it out!
SMTAI 2019: Juan Arango Discusses Koh Young America's New Headquarters
Andy Shaughnessy speaks with Juan Arango, managing director of Koh Young America, about their new corporate headquarters in Atlanta, Georgia, which is located near most of their U.S. customer base.
SMTAI 2019: Nir Benson Discusses Mentor's Challenges and Solutions
Nir Benson, business development manager at Mentor, a Siemens Business, talks with Andy Shaughnessy about his work to integrate the two companies' solutions, some of the challenges he sees, and his efforts to optimize their cloud-based systems.
SMTAI 2019: Kristen Mattson on the SMTAI Vacuum Reflow Systems Demo
Kristen Mattson, marketing principal at BTU International Inc., and Nolan Johnson discuss the vacuum reflow demo that's running on the show floor and the program with the American Competitiveness Institute where they have PYRAMAX vacuum reflow systems available for customer process evaluation.
SMTAI 2019: Tom Forsythe on Cleaning Challenges and Solutions
Andy Shaughnessy speaks with Tom Forsythe, KYZEN executive VP, about the challenges created by continually increasing densities as well as some of the company's newest cleaning solutions.
SMTAI 2019: Gary Tanel Provides an SMTA Update
SMTA Ambassador Gary Tanel gives Andy Shaughnessy an update on his work with Electronics Alliance and the Dallas chapter of SMTA. He also discusses the JoAnn Stromberg Student Leader Scholarship Award and the Charles Hutchins Educational Grant.
RTW IPC APEX EXPO: IPC Global Government Relations Initiatives and Updates
IPC VP of Global Government Relations Chris Mitchell discusses with Judy Warner the association’s initiatives such as the IPC Workforce Champions, the skills gap analysis, and how IPC plans to advocate for the industry and grow the supply chain in North America and around the world.
Octane Open Concept Solution: Innovative Analytics and Floor-control Software
Octane Open Concept targets the contract manufacturer and is well along in the development process for a pair of software tools designed to optimize assembly and testing results tracking on the manufacturing floor. In an interview, CEO Craig Reiselt discusses the company and the products and opportunities in front of Octane.
IPC Validation Services: New Programs and Updates
At the recent IPC APEX EXPO 2019 show, Randy Cherry, director of IPC Validation Services, gives Judy Warner an overview of a new IPC-1791 QML program focused on prime contractors and OEMs, and provides updates on existing programs.
RTW IPC APEX EXPO 2019: iNEMI on Next-generation Soldering
Grace O’Malley, VP of technical operations at iNEMI, and Editor Nolan Johnson discuss the next-generation soldering buzz session workshop hosted by iNEMI at IPC APEX EXPO 2019 and the upcoming bi-annual technology roadmap that will be released this spring.
RTW IPC APEX EXPO 2019: Aculon on Technology Developments and Partnership with Henkel
Aculon CEO Edward Hughes and Editor Pete Starkey discuss surface modification technologies based on nanochemistry. Of particular interest to electronics technologists are recent developments in waterproofing treatments for assemblies, and how Aculon's strategic partnership with Henkel opens up new opportunities.
RTW IPC APEX EXPO 2019: Reducing Voiding in Reflow Soldering
Chris Nash, product manager for PCB assembly solder paste at Indium Corporation, speaks with Kelly Dack and highlights Indium’s take on three important aspects of reliability: thermal, mechanical, and electrical. He talks about challenges of all three aspects, which include solder voiding, and how Indium helps the industry address these issues through its solder paste formulations.
RTW IPC APEX EXPO 2019: Thermaltronics Discusses New Soldering Robot
Michael Gouldsmith, director of Thermaltronics, speaks with Editor Dan Feinberg about their new TMT-9800S robotic soldering unit. He also talks about an inline robotic soldering system—the next stage of their product development—which is scheduled to be released in the middle of the year.
Two Full CFX Demo Lines at IPC APEX EXPO 2019
During IPC APEX EXPO, Editor Dan Feinberg spoke with David Bergman, IPC VP of standards and technology, about CFX, IPC’s Connected Factory Exchange software for machine-to-machine communication. With more than companies now supporting CFX, IPC set up two full lines for demonstration at the show.
RTW IPC APEX EXPO 2019: MIRTEC Discusses Automation, CFX, and Sales Success
MIRTEC President Brian D'Amico speaks with I-Connect007 Guest Editor Dan Beaulieu about automation, the Connected Factory Exchange (CFX) standard, and their banner year last year. He speaks about Industry 4.0, automating the inspection process, and collecting more data to help refine the manufacturing process.
RTW IPC APEX EXPO 2019: BTU Discusses New Solder Flux Reclamation Solutions
Bob Bouchard, corporate marketing manager at BTU International Inc., updates I-Connect007 Managing Editor Nolan Johnson on new solder flux reclamation solutions and details the new aqueous scrub methodologies, their increased ROI and efficiencies, and reduced maintenance.
RTW IPC APEX EXPO 2019: Manncorp Highlights Custom SMT Lines
Ed Stone, sales manager for Manncorp Inc., sits down with I-Connect007 Guest Editor Dan Beaulieu and discusses how they are helping customers with low- to medium-volume type production needs by installing custom SMT lines within 48 hours.
RTW IPC APEX EXPO 2019: LPKF on Benefits of Laser Depaneling
Laser technology marches on, and marching along with it is LPKF's new line of laser depaneling equipment. Stephan Schmidt, president, talks with I-Connect007 Guest Editor Kelly Dack about the many benefits of using lasers including cleanliness and higher yields through increased array density.
RTW IPC APEX EXPO 2019: Lenthor Discusses Facility Expansion and New Equipment
Rich Clemente, general manager of Lenthor Engineering, discusses with Dan Feinberg, I-Connect007 Guest Editor, the company’s expansion and new facility and equipment. He also talks about his outlook for the electronics manufacturing industry in North America.
RTW IPC APEX EXPO 2019: MacDermid Alpha Highlights Solutions to Combat Voids in Solder
Joe Fjelstad speaks with Paul Salerno, global portfolio manager at MacDermid Alpha Electronics Solutions, about their latest product and process solutions to combat voids in solder including modifications in pastes, preforms, and vacuum assist soldering.
Dan Schoenfelder: Searching for Parts in Real Time
The I-Connect007 editors recently sat down with Dan Schoenfelder, vice president of business development at Octopart. We discussed online parts libraries and the impact they can have on choosing parts based on availability data during the design process.
RTW IPC APEX EXPO 2019: Enabling Complete Automation for Customers
Steve Williams and Saki CEO Norihiro Koike discuss Saki's AOI equipment and complete solution for electronic manufacturers, the industry-leading accuracy of their 3D equipment, and their recent Panasonic IoT certification to provide process data back to the pick-and-place equipment.
RTW IPC APEX EXPO 2019: Panasonic Highlights New Products, IPC STEM Student Outreach Program
Sean M. Murray, GM of North American Sales EAG Group for Panasonic, and Nolan Johnson, I-Connect007 Managing Editor, discuss two new product announcements at the show—PanaCIM process tracker software and MPM-WX—and being a sponsor for the IPC STEM Student Outreach Program.
RTW IPC APEX EXPO 2019: New IPC Technical Education Program Manager
Brook Sandy-Smith discusses her new role as IPC technical education program manager, which is also a brand-new IPC position. She further explains the benefits of membership, when a member should contact her, the IPC STEM Outreach Program, and upcoming events.
RTW IPC APEX EXPO 2019: ASM Updates Mid-Level Machines
ASM CEO Americas Jeffery L. Timms and Technica President and CEO Frank Medina give Nolan Johnson a product update on ASM's mid-speed machines—EbySIPLACE and EbyDEK. By bringing key features from ASM's high-end products to their new mid-level models, ASM's new machines are gaining attention Timms and Medina discuss the how and why.
RTW IPC APEX EXPO 2019: KYZEN Intros New Aquanox Aqueous Cleaner
In an interview with I-Connect007 Technical Editor Pete Starkey, KYZEN Executive VP Thomas M. Forsythe introduces the latest member of the Aquanox family of aqueous cleaners and comments on issues of compatibility, rinsability, and consistency of operation.
RTW IPC APEX EXPO 2019: KIC Speaks on Data, Voiding and Traceability
Bjorn Dahle, president of KIC, talks with I-Connect007 Technical Editor Pete Starkey about how the industry has shifted its focus from the machine to data; the issue on voiding and how manufacturers can address this process challenge; and traceability.
SMTAI 2018 Closes on a High Note
SMTA International 2018, which took place in Rosemont, Illinois is now in the history books. This multi-day event, held October 14-18, at the Donald E. Stephens Convention Center, was packed with keynotes, conferences, lively discussions, committee meetings and a two-day exhibition.
Press Release Tips
Copyright © 2020 I-Connect007. All rights reserved.