Lost your password?
Not a member?
Resend confirmation instructions
Sort By Category
- New Technology
- New Products
- Test & Inspection
- Breaking News
- IPC Standards
- Rework & Repair
- From The Show
- Market Impact
Review: Emerging Opportunities for Additive Electronics
09/15/2021 | Pete Starkey, I-Connect007
Reducing the Cost of Solder Alloys Used in Wave and Selective Soldering Assembly Applications
09/15/2021 | Mitch Holtzer, MacDermid Alpha Electronics Solutions
From DesignCon: Neoconix Reacts Favorably to Higher-Density Market
09/14/2021 | Nolan Johnson, I-Connect007
BOM Connector: A Ready-Built Solution
09/10/2021 | I-Connect007 Editorial Team
Whizz is Da BOM
09/08/2021 | I-Connect007 Editorial Team
SMT :: OEMs
Leveraging Data Analytics in Recall Scenarios
Minimize the impact of product recalls by using smart data to uncover the root cause. One of the most effective ways to minimize the impact of a recall is to define the root cause of the defect quickly and accurately, thereby minimizing the number of products that need to be recalled. For example, if a defect is related to a specific spike in temperature on the production line, only products that were produced during the spike need to be recalled: the rest of the products are not impacted.
electronica Virtual 2020: Automotive Conference Keynotes
While not the same as battling with the traffic to catch the early flight to Munich, followed by an S-Bahn into the city and a crowded U-Bahn to the Messe, electronica 2020 went virtual. Pete Starkey details the Automotive Conference—an event he was particularly keen to attend.
Watch & Learn! Latest Installment of I-007e Micro Webinar Series Features EV Charging Controller Case Study
The eleventh episode of the popular micro webinar series “Coatings Uncoated!” is now available to view. In “Cycle Time Constrains Coverage,” topic expert Phil Kinner from Electrolube examines the trade-off between cycle time and coverage required while considering an electric vehicle charging controller case study. If you are in the assembly business, an EMS company, or responsible for specifying conformal coating and/or encapsulation, then this free series is for you.
Best Practices Highlighted at the 2020 IPC EMS Management Meeting
The key challenge at the top of EMS leaders’ minds during roundtable discussions was the lack of skilled workers. Leaders brainstormed solutions like creative identification and sourcing of talent outside of the manufacturing sphere, leveraging the flexibility of smaller businesses to make changes attractive to potential employees as well as cooperation with IPC and other talent development programs. John Mitchell updated the group on the IPC Education Foundation (IPCEF) and workforce initiatives to build and support workforce needs. The group welcomed Andy Marris of MRA, who discussed motivating and engaging an existing workforce to create a competitive advantage.
IPC APEX EXPO 2020 Attendees Speak: Travis Smith and Mindy Sanchez
"I’m seeing a lot of great manufacturers and different equipment that’s available in the market, as well as new, emerging technologies," said Travis Smith of Ball Aerospace. "I’m learning a lot more about some of IPC’s standards and committees as well. It has been a fantastic week of educating ourselves for manufacturing processes going forward. And the IPC booth has a wealth of information."
The IPC Education Foundation’s New Column
The IPC Education Foundation’s new column with I-Connect007 will feature Charlene Gunter du Plessis, Aaron Birney, and Corey Lynn. These IPC Education Foundation members will share updates on programs and activities here. Find out more about the authors below and read "Foundations of the Future" in the SMT007 Week Newsletter.
What’s the SCOOP: Chinese New Year
Chinese New Year really is an amazing celebration with millions of workers returning to their families for the celebrations. But with the shutdown and mass migration come stress on infrastructure, supply chain and the whole manufacturing and fulfillment ecosystem. I asked a few Industry experts what they thought the key issues are and what advice they’d offer.
Which Matters Most: Unit Cost or Total Cost of Supply?
The primary objective for any OEM is to design, manufacture, and deliver high-quality products in the most cost-effective way possible. When demand patterns change, or there is an increase in competition, it can be easy to rely on the calculation of unit cost to relieve the price pressure. But, as many manufacturers are discovering, choosing to base their outsourcing decisions purely on unit cost may not always reap the expected benefits in the long term.
Which IPC-A-610 Class is Best for Your PCBA?
For many EMS providers, IPC-A-610 is the agreed standard to define what's acceptable and what's not in the world of PCBA production. As an OEM, it's important that you're clear on the basic principles that separate those classes so that you have a clear and realistic expectation of what the results are going to be.
Four Hidden Materials Handling Costs Every OEM Should Know
Many of the expenses within your electronics manufacturing business are highly visible and undergo regular scrutiny. But there can also be much to be gained by keeping track of those less obvious material costs that may not be formally accounted for in your monthly reporting.
Advice to OEM System Designers
In a recent I-Connect007 survey, we asked the following question: "What advice would you give an OEM system designer?" Here are just a few of replies, slightly edited for clarity.
Top 10 Most-Read SMT007 Columns of 2018
Each year, we compile the lists of most-read news, articles and columns. Here are the top 10 most-read SMT007 columns from the past year.
Managing Cyber-Threats Within Electronics Manufacturing
The rise of the 4th Industrial Revolution (4IR) has brought with it digital interconnectivity that offers unprecedented opportunities for original equipment manufacturers (OEMs). But with that openness there also comes risk—the threat of the loss of data, the theft of capital or intellectual property, and the disruption of access to systems or operational technology—all of which can impede businesses and impact on trade.
Real Time with...SMTAI 2018 Coverage Now Available
The I-Connect007 team traveled to Rosemont, Illinois this week to cover the SMTA International 2018 conference and exhibition. Video interviews of key executives and leaders of our industry are now available for viewing. Also check out the photo gallery for snapshots of the exhibition floor and the conference as well as the after-hours festivities.
Riding Out the Electronic Components Crisis is No Longer an Option
The electronic components shortage is continuing to take its toll on the electronics manufacturing sector. As market demand outstrips manufacturing capacity, the fallout from the components crisis is now predicted to extend well into 2020, and beyond. And it’s a problem which OEMs can no longer hope to simply ride out. Find out what you can do to address this issue.
Is There an End in Sight to the Electronic Components Crisis?
As new and innovative technology continues to evolve on a daily basis, the need for electronic components has reached unprecedented levels, with passive manufacturers in particular among those struggling to cope with demand. Electronic component shortages are now such an issue that many OEMs are predicting their forecasted growth for 2018-2019 will be thwarted if they are unable to source the parts they need.
5G: Testing the Future Impact
The impending arrival of 5G is not without its entourage of challenges that will require a different approach in the electronics manufacturing process. One that is already impacting the electronics manufacturers and assemblers is the testing of the devices. Industry analyst firm Occams Business Research Consulting expects the global 5G network infrastructure market to register a 70% CAGR from 2016 to 2023 and reach up to $28 billion by the end of the forecast period. North America is the leading market for 5G network.
Electronic Component Shortages are Real
The electronic component market is in poor shape (again) and the sooner you face this fact, the sooner you can put plans in place to mitigate the risk to your business. Electronic component shortages are once again causing OEMs and EMS providers a real headache. Here's a look at the current state of the market, and seven ways in which you can work closely with your EMS provider to make the best out of a bad situation.
Automotive Electronics Still in the Driver’s Seat
The past year was one of the strongest years that the PCB supply chain and the rest of the electronics manufacturing industry in general, has seen. Everyone we talked to at the shows were optimistic that the strong growth in the industry in 2017 will continue through 2018. And most industry players point to one thing when it comes to what’s driving this strong growth—automotive electronics.
Show & Tell: Corporate Awards Bestowed by IPC
Every year IPC recognizes two companies that have made significant contributions to IPC and the electronics industry. These awards are named after industry executives who were themselves significant and outstanding contributors: one for a PCB fabricator company and one for an electronics manufacturing services (EMS) company. This year’s recipients were Northrop Grumman and Rockwell Collins, respectively.
Your Competitors are Outsourcing Their Manufacturing; Shouldn’t You?
As an OEM, you will be focused on increasing sales and maximizing profits. But you can only sell what you can produce, and manufacturing complex industrial electronic products day in, day out can be a headache. As your sales start to climb, you move closer to hitting your internal capacity limits. Here's how EMS providers can help you become successful in your manufacturing.
Setting Clear Boundaries with Your EMS Provider
A common area for confusion, particularly during the early stages of an outsourcing partnership, relates to 'boundaries', and agreeing who is responsible for what. If clear lines are not discussed and agreed between you and your EMS provider, it can be easy to fall into an assumption trap, and we all know what happens then.
Why the Right Preparation is Crucial for Your NPI
In today's increasingly competitive manufacturing environment, it's crucial that you are able to produce high quality new products that can be delivered on time, at the volumes required and at the right cost. And the key to ensuring a smooth transition from the initial design through to final manufacture is the implementation of a new product introduction (NPI) process.
Tips & Tricks: Machine Assist Time
Assist time is the human intervention required to keep a machine producing during normal operation. It does not include errors, maintenance, setup, and prototyping. There are many reasons for a machine to require assistance. PCB loading, stencil wiping, paste addition, feeder replenishment, and PCBA unloading—some require labor, some can be automated, but all will require some amount of time to complete.
Top 10 Most-Read SMT Articles of 2017
Every year, we like to take a look back at the most popular SMT news and articles. These are the top 10 most-read SMT articles from the past year.
The Year of IoT Digitalization
There is no longer any significant disagreement that having an industry-wide standard for IoT communication is absolutely essential for digitalization of factories if they are going to deliver on Industry 4.0 performance expectations. Digitalization of manufacturing is the key business opportunity of the decade, whoever and wherever you are, so stand-up and be a part of it, and create your opportunities.
How to Ensure Good Service from Your EMS Partner
What does good service mean from an EMS provider? Sure, it’s about consistently delivering products, on time, and to a high quality. But there's more to it than that. This article highlights two factors to consider when choosing an EMS provider to ensure good service and a strong, healthy and happy outsourcing partnership.
5 Simple Elements to Guarantee Outsourcing Success
Rather than viewing outsourcing as a way to offload unwanted tasks, OEMs should spend time carefully selecting and then maintaining a properly managed relationship with their chosen EMS partner. Here are five simple elements that you should focus on before, during and after an outsourcing strategy to guarantee it is a success.
What Does an OEM Really Gain from Outsourcing their Manufacturing?
But what does an OEM really gain when they make the move from an in-house manufacturing operation to an outsourced one? This article looks at two key benefits OEMs stand to gain once they relinquish control and hand over their production responsibility to an EMS provider.
Should I Involve My EMS Partner in DFM?
OEMs are seeking the support of EMS providers with more than just manufacturing, but with design elements too. One of the main design services EMS providers will be likely to offer is design for manufacture (DFM). This article highlights why engaging your EMS partner in DFM is worthwhile, and will be valuable in securing the longevity of your product.
Cybersecurity: 4 Things OEMs Should Do to Protect Themselves
Manufacturing has been declared one of the top three most targeted industries for cyber attacks. While Industry 4.0 and expansion into cyber-physical systems will have a positive impact on the industry in terms of increasing efficiency, they open the door to even more security risks such as a hacker taking over production, or changing the output of the manufacturing process.
What to Expect During the First Months of Trading with an EMS Provider
The start of an outsourcing partnership is an exciting time for an OEM, but it's also one that can be daunting. However much you've prepared for that big moment when you hand over responsibility for part or all of your manufacturing operation to your chosen EMS provider, it's still normal to question if you are making the right decision. This article explores five key areas that you and your chosen EMS partner should focus on during the initial months.
New Challenges Facing Mil/Aero Segment
For this month's issue, we invited a sampling of professionals whose experience centers on the electronics industry in the military and aerospace world, including experts from design, PCB manufacturing, and the assembly arena to sit down with us for a frank discussion. Our discussion centered on the challenges associated with military work, including the new regulatory requirements for cybersecurity, dealing with leaded vs. lead-free components, and the differences and similarities with the commercial world.
How Much of My Electronics Manufacturing Should I Outsource?
Once you have decided to outsource to an EMS partner, you need to think about how much of your existing operation you plan to relinquish. This article looks at four distinct areas OEMs outsource—procurement, assembly, test and logistics—explores the benefits associated with relinquishing each of these, and highlights a number of questions that must be considered before any final decision is made.
Today’s Mil/Aero Enemies: Counterfeits, Obsolescence and Failure
The need for high-reliability electronics, components and assemblies that can perform in harsh operating conditions involving extreme temperatures, vibration, and moisture continue to challenge electronics assembly providers catering to the military and aerospace markets. These are on top of current manufacturing issues such as the miniaturization of products, shrinking component sizes, higher density board assemblies, and the obsolescence of electronic components.
How Important DFM is for Your Electronics Assembly Partner
Each OEM will have their own set of criteria when it comes to selecting an appropriate EMS provider. But where does design for manufacture (DFM) support come into play? Is it a priority? Should it be? And what benefits does this service have to offer the OEM? This article explores some of the benefits DFM offers OEMs and how this service can help realize elements of an outsourcing strategy.
Assembly Training and Education
Even if your PCB assembly process is optimized, there is always room for improvement. And no matter how successful your company has been in the past, you just can’t rest on your laurels. It is always in your best interest to strive towards a better operations model. We've created a survey to help us gauge the importance of training and education in your workforce, and the benefits that you get in ensuring that your operators and engineers have the most current knowledge and skill sets.
The Benefits of Postponement Manufacturing When Outsourcing
With the world changing at an incredible pace, OEMs agile enough to respond rapidly to customer demand stand a greater chance of survival compared to those that are not. This article looks into the late stage configuration technique and some of the benefits an OEM can expect to gain when outsourcing to an EMS provider that offers this service.
Should You Use Your CEM Partner's Direct Ship Fulfillment Services?
Gone are the days when OEMs simply outsourced their printed circuit board assemblies to contract electronic manufacturers (CEMs). Today, many CEMs offer a much broader range of services, including an end-to-end outsourcing solution – the end point of which is direct ship fulfillment, whereby the CEM sends fully manufactured and tested products directly to the end customer.
How Servitisation Can Enable Manufacturing Sales Growth
OEMs and EMS providers must implement strategies that enable sales growth – and one such strategy is servitisation, which is about putting the needs of your customers first.
What to Look for When Auditing an Electronics Manufacturing Facility
Although a large amount of research can be carried out online when selecting an EMS partner, the only real way to satisfy an OEM whether an EMS provider will be a good fit or not is to meet the team and audit their processes. This article lists the approach many OEMs take and highlight some of the key questions they ask.
5 Reasons Why OEMs Outsource to EMS Providers
Why do original equipment manufacturers (OEMs) outsource to electronics manufacturing services (EMS) providers? This article provides five reasons why OEMs venture down an outsourcing path, and the benefits they gain along the way.
Digi ConnectCore 6UL Creates a Big Buzz at electronica
Guy Volckaerts, director for EMEA embedded sales at Digi, speaks with I-Connect007's Judy Warner about Digi’s star-of-the-show at the recent electronica event in Germany—the Digi ConnectCore 6UL—a quick, simple, feature-rich, yet very flexible system-on-module solution for OEMS and developers.
The Impact of Vias on PCB Assembly
Via technology has been one of the solutions to address the miniaturization and component density challenges in current electronic assemblies. However, vias are not without their own set of challenges. As per our recent survey, these include impedance matching, routing, placement of vias, minimum size limitations, aspect ratio, and the limitations for the PCB manufacturer.
Is Your Manufacturing Facility Now the Weak Link?
If your manufacturing facility is the weakest link in your chain, all of the hard work put in beforehand—design, marketing, sales, purchasing—will have been wasted. This article looks at three signs your manufacturing facility could be dragging the rest of your company down, and highlights how outsourcing to an EMS provider can help.
Achieving the Smart Factory Vision
James Liu, director of Standardization and Electronics Manufacturing at the Smart Factory Institute of the China Science and Technology Automation Alliance, talks about helping small- and medium-sized companies transform their production into smart factories. He explains the challenges these companies face, and the need for a free, open interface to connect disparate electronics manufacturing equipment and systems on the factory floor.
Is Your Sales Growth Outstripping Your Current Manufacturing Capacity?
Picture the scene: you are an OEM enjoying healthy sales growth—business is booming as you win new customers and sell more to the ones you already have. However, there's just one problem – you don’t have the manufacturing capacity to accommodate your growth, whether because your factory is too small, you are lacking crucial equipment, or you simply don't have enough staff. Here's what you can do.
How to Successfully Manage the OEM/CEM Partnership
A successful outsourcing initiative is built on trust and communication and both partners—the original equipment manufacturer (OEM) and a contract electronics manufacturer (CEM)—need to be clear on what their own roles are, in order to realize the innumerable benefits.
The Industry Speaks
In the latest issue of SMT Magazine, we take a pause from covering the latest technology trends, challenges, and solutions in the electronics manufacturing and assembly industry. Instead, we are focusing on our readers—to give a voice to their thoughts on the industry, companies, jobs, interests, and even pain points when it comes to their respective specialties.
Integrated Manufacturing Solutions: an EMS, ODM, CM, and OEM!
Robbin Thompson, VP Business Development at San Diego-based contract manufacturer Integrated Manufacturing Solutions (IMS), speaks with I-Connect007's Barry Matties and Judy Warner about her company's expansion, production capabilities and product lineup, as well as the culture at IMS.
3 Common Fears About Outsourcing Your Outbound Logistics
If you are still responsible for shipping finished product to your end users, you may be facing difficulties that are distracting you from your core activities. This article explains how you can overcome the common fears about outsourcing your outbound logistics to an EMS provider.
Improving Test and Inspection
In our recent survey on PCBA test and inspection challenges, respondents consider the following to be among their biggest problems: probing to narrower traces and pads; testing boards with smaller and finer features and sizes; dry solder and other solder-related issues; finding sublayer defects; dealing with flat, no-lead components; and testing cycle time. This month, we look into different PCBA test and inspection strategies that address the key challenges in today’s electronics manufacturing and assembly environment.
Solder Paste Exploration
From the manufacturers of solder pastes, to equipment makers, all the way to the solder paste inspection guys, and the electronics assemblers who are using their products, I talked to the supply chain to find out what’s going on in the solder paste printing process, what factors impact the process, the challenges, and the best practices to consider to be able to address those challenges and improve efficiencies and yield in the SMT line.
A Preview of the 2016 International Microwave Symposium
The 2016 International Microwave Symposium (IMS) is taking place May 22–27 in San Francisco. I-Connect007's Barry Matties spoke with IMS’s Amanda Scacchitti about the upcoming show, the keynote speakers, and how IMS continues to put an emphasis on STEM education with their own STEM program for kids.
Taking the Gremlins Out of Your Process
Every step in your assembly line is supposed to be designed to perform optimally for you to have an efficient, reliable, robust and reproducible process. However, and as isolated as they may seem, "gremlins" sometimes appear and mess up the results of a batch. The latest issue of SMT Magazine features strategies that can help you address these issues.
Remove Your Shop Floor by Using a CEM
Once OEMs embark on an outsourcing strategy, a number of "shop floor" activities are transferred over to their CEM's manufacturing facility. In this article, Neil Sharp discusses the different areas that OEMs need to relinquish to their CEM in order to be in a position to remove their shop floor completely, so that they can focus on the areas of their business that matter the most.
According to our recent survey, the key challenges impacting profitablility of electronics manufacturers and assemblers are cost, process improvement, changing customer demand, design, training, and Lean manufacturing. The March 2016 issue of SMT Magazine highlights strategies that will help electronics manufacturers address those issues and achieve profitability in their operations.
Rapid Prototyping is a Fiscal Game Changer
When done right, rapid prototyping can increase an OEM's top-line revenue and extend their product lifecycles by ensuring that their product features at launch are actually the features their customers need.
While the latest technology innovations bode well for the electronics industry, they also offer many challenges in terms of the way products are being manufactured. The latest issue of SMT Magazine features "what's new" in the electronics assembly industry, and discusses how they are addressing current manufacturing challenges.
EMS: Quo Vadis? (Where are You Going?)
In an industry that is constantly changing, EMS providers have reinvented themselves to stay relevant and fuel profitable growth. In this article, Integrated Micro-Electronics Inc.'s Frederick Blancas talks about five of the many transformation trends happening in the EMS industry, and how they are pushing the industry to continue to evolve, progress and advance.
Medical EMS: Opportunities Abound
Megatrends such as the increasingly ageing population and growing demand in emerging economies worldwide bode well for the medical electronics assembly industry. However, challenges such as margin pressures, compliance costs and risks, supply chain instability, and new product introduction headaches are hindering a more aggressive prognosis of the industry. But, with innovation, medical manufacturers can churn out more.
Valtronic Highlights Vital Components in Medical Electronics Manufacturing
Jay Wimer, executive vice president of the Valtronic Group, and president and CEO of Valtronic USA, discusses the impact of the medical market on the electronics manufacturing industry, the challenges facing medical electronics manufacturers and technology providers, and how the trends happening in the medical electronics segment are driving innovation in electronics manufacturing.
Top 10 Factors to Consider When Selecting a Medical EMS Company
Once the decision has been made to use an EMS company, selecting the right one involves several steps. Although most EMS companies perform the same basic services, every EMS company is different. In this article, Mo Ohady and David Estes of Digicom Electronics write the 10 key factors to consider when selecting your medical EMS company.
Medical Electronics: Manufacturing Vitals
With the rapidly growing aging population, rising healthcare costs and increasing health awareness, opportunities abound in consumer medical devices, diagnostics, imaging, and instrumentation. However, the medical electronics industry is not without its own set of challenges. The January 2016 issue of SMT Magazine highlights the manufacturing challenges and opportunities in this growing sector.
OEM Applications: MacDermid’s OEM Director Embraces Renewed Focus
Lenora Toscano, OEM director for MacDermid’s electronics solutions division, discusses the needs of the end-user market of PCBs, her own role at the company, which involves much interaction with OEMs, and the benefits that both she and MacDermid bring to SMTA and IPC meetings.
The New Industrial Era
Key transformative technologies such as big data, analytics, and IoT are ushering in a new industrial era, where new technology forces and innovations are changing the dynamics, risks, and success factors for global manufacturing companies. To be successful in this environment, a mindset shift is required when it comes to deciding what to do and how to take your manufacturing operations to the next level.
Value Stream Mapping: Operationalizing Lean Manufacturing
By applying value stream mapping (VSM), EMS providers can have a clearer picture of multiple processes involved in a work flow, identify waste and its sources, identify where change is required, standardize the process, and identify potential problems that could be encountered in the future state. It can also be used as a tool for planning as well as for managing changes.
Surface Mount Technology Association—a New Milestone
With a grand mission, SMTA is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations. The organization delivers the right information at the right time to empower the workforce, who collectively advances technology, innovates new products, and serves the global industry.
NEPCON Shenzhen 2015 Puts Spotlight on China's EMS Industry
From ODM and OEM to EMS, the Chinese electronics manufacturing industry is transforming from single, passive processing to active, intelligent manufacturing—in line with the "Made in China 2025" plan, as well as the latest trends happening in the electronics industry.
EchoStar: The Future of Supply Chain Management Done Right
EchoStar isn’t your typical OEM—they take supply chain management to a whole new level. Barry Matties was able to visit Echostar's EMS partner in Shanghai, DD & TT Electronic Enterprise, to take a look at what they are doing, and find out about Echostar's supply chain management strategies.
EchoStar’s Les Beller Shares the PCB Design-to-Fab Process
Recently, I-Connect007 Publisher Barry Matties had the opportunity to interview Les Beller of EchoStar Technologies. Beller’s career began in the early 1980s as a circuit board designer, eventually leading him to EchoStar, where he has managed the PWB design group and spent time as a PCB quality engineer. He is now a manufacturing process engineer specializing in DFx. In this interview, Beller focuses on the many challenges circuit board designers face, strategies for bridging the gap between circuit design and fabrication, and the future of circuit designers.
Supplier Selection Key to Assembly Reliability
As with any electronic assembly, or electronic device for that matter, the quality of the raw printed circuit board is the most critical link in the product reliability chain. According to Steve Williams, the key to managing this risk is the supplier selection and qualification process.
Copyright © 2021 I-Connect007. All rights reserved.