-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Tin Whisker Mitigation Methodologies: Report from SMART Group, Part 1
December 1, 2016 | Pete Starkey, I-Connect007Estimated reading time: 8 minutes
Cawthorne reviewed the definitions of the mitigation control levels defined in GEIA-STD-0005-2, commenting that the required level would normally be a function of the design authority in consultation with the customer, and that military applications would typically expect mitigation to at least Level 2B—risks managed primarily through mitigations, including design rules, and more likely 2C—risks managed more by avoidance and less by mitigation. Level 3 managed whisker risks through complete avoidance. He went on to discuss the detail requirements of Levels 2B, 2C and 3, with particular reference to the use of conformal coatings to form a physical barrier. The defining standard for tin whisker susceptibility of tin and tin alloy surface finishes was JEDEC JESD201A, an accelerated test used by component manufacturers, but there was some doubt as to the reliability of results since tin whiskering was such an unpredictable phenomenon.
In summary, as the standards had evolved, they had become increasingly definitive with regard to component-to-component spacing design rules. There had been a move away from component termination material type, structure and processing as specific mitigation strategies. Strategies were now based on protective barriers, re-finishing of component terminations, and automatic coverage of pure tin finished surfaces by tin-lead solder during the assembly process.
A series of collaborative projects had been carried out at the National Physical Laboratory to evaluate conformal coating as a tin whisker mitigation strategy for printed circuit assemblies. Martin Wickham reviewed previous findings and gave an update on current work. Using a tin plating process deliberately chosen for it high propensity to whiskering, NPL had developed a parallel plate test vehicle that had been enabled electrical detection of failure. One observation was that failure predominantly occurred at the edges of plates, where full coating thickness was not maintained around the right angle bend, and this geometry was a characteristic feature of component leads. An additional test vehicle had been designed, based on a PCB with 24 SOIC14 packages, assembled using range of techniques, to enable testing for short circuits between adjacent leads on individual component. Each batch of eight boards was delivered to consortium partners for coating and returned to NPL for testing. The assemblies were constantly monitored at a test voltage of 15 volts with a series resistor to limit current to 15 milliamps.
Nine batches had been built to date, together with control assemblies with no coating, all of which had shown extensive whiskering before any evidence was seen on the coated examples. Using the analogue of two sword-fencers for illustration, Wickham explained different failure modes: intermittent shorts involving more than one whisker, and longer shorts penetrating out through the coating in one position and back in through the coating elsewhere. He showed several examples of actual failures, and other instances where whiskers had grown but not yet been detected electrically. It was intended to continue ageing the test vehicles and review failures after a further six months, and to visually inspect the assemblies again after twelve months, also to build control assemblies to investigate the effect of temperature during coating. Possible future work would investigate the effects of vibration and forced air cooling.
In Part 2, SMART Group Steering Committee member Ian Fox, Micross Components’ Mark Walmsley, and more words from Dr Mark Ashworth.
Page 2 of 2Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.