-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Reflow Perspectives to Flex Circuit Assemblies
July 13, 2018 | Stephen Las Marias, I-Connect007Estimated reading time: 3 minutes
At the recent NEPCON China 2018 event in Shanghai, I spoke with Ralf Wagenfuehr, plant manager at Rehm Thermal Systems (Dongguan) Ltd, to gain insight into flex circuit assembly, and the challenges of reflow soldering.
According to Wagenfuehr, flex circuits are increasingly being used in mobile phones over the past two years as manufacturers have been redesigning their phones with more curves and more functions and additional components inside.
"The PCB is getting smaller, and modules are being built on the flex printed circuits, not only the connector. Now, it’s integrated circuits in the flex boards, and sensors, which are becoming much smaller. As an example four years ago, the smallest chip component was 03015. Now, the 008004 chip component is also on the market. The 008004 component is 35% smaller than the 03015 component. The challenge of reflow soldering is how to ensure the oxygen content in the reflow chamber and how to ensure the stability of the reflow air volume to avoid such defects as tombstone," Wagenfuehr says. "You can now bring the components in mobile phones to the position that is good for the user. More and more, these applications—mobile phones, smart devices, and other similar applications—are definitely increasing the market demand for flex circuits. But I think, in big components like in automotive, it is very seldom used because of the reliability of flex circuits in such applications. They should last for years, not only just for a short time. They are using other components, for instance, the flex circuits may be integrated in housings, MID’s moldings—in automotive electronics. But flex circuits, definitely more and more in handheld devices."
One of the biggest challenges when it comes to the reflow soldering of flexible circuit assemblies is warping. "First of all, flexible circuits are very light. While some customers are trying to process flex circuits without holders or carriers, experienced manufacturers are using magnetic holders or similar things to keep the flex circuits in place. But I think soldering is not only the biggest issue. I believe, printing and chip mounting are definitely a challenge for manufacturers when it comes to flex circuits because they are not steady."
According to Wagenfuehr, mitigating this problem starts with the design. He says designers should consider not only the application but also the manufacturing. In fact, there is a clear definition of IPC-6013 with Amendment 1, Qualification and Performance Specification for Flexible Printed Boards. As long as the FPC has the correct design, it can be reasonably used in the manufacturing process.
"Some applications are very hard to realize; and some applications cannot be processed in the reflow. Some applications may be unsuitable for condensation soldering systems. So, the manufacturer of flex circuits should consider the manufacturing processes, the whole step," he explains. "Ordinarily, we are just supporting the applications in general. When we’re having issues and the customers cannot solve it, this very point that’s just mentioned, maybe the manufacturer of such boards should come with the equipment suppliers earlier in the stage. That will be much more helpful. Also, having them early at the design stage, to fit it in the whole process chain, will make it easier to manufacture the flex circuit assemblies."
Wagenfuehr also stresses the importance of communication with their customers and users. "There are a lot of limits that they should consider—limits in the design, in preparation of the fixtures—to ensure proper soldering. We can support our customers in applications where we have certain experiences, such as in mobile phone manufacturing, for instance. We also have to know more about our customers issues. We are happy to help in the process steps. We have a rich experience and we can also consider the early design stage with our application teams in China and Germany."
In fact, Wagenfuehr notes that they will be willing to join forums to address these issues. "It will be nice if it is focused on soldering flex printed circuits. There is not much forums happening in manufacturing in this front. It’s always driven by the designers—that’s the problem. They don’t ever consider the equipment. They just do the designs, which, sometimes are impossible or quite challenge to manufacture. It will be good if forums will be created to bring the designers and equipment manufacturers together to discuss the issues. That will be helpful in the future."
This article was initially published in the June 2018 issue of SMT007 Magazine.
Suggested Items
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Nordson Electronics Solutions Expands the SELECT Synchro Selective Soldering Equipment Family With New Synchro 3 Release
04/03/2024 | BUSINESS WIRENordson Electronics Solutions, a global leader in reliable electronics manufacturing technologies, releases the Synchro™ 3, a new model in the SELECT® Synchro™ selective soldering equipment family for high-volume printed circuit board assembly applications.
Revolutionizing Precision Soldering: Introducing the iBot-i1/2s by Sasinno Americas
04/02/2024 | Sasinno AmericasSasinno Americas is pleased to introduce its latest advancement in soldering technology – the iBot-i1/2s. This cutting-edge system redefines precision soldering with groundbreaking features designed to elevate efficiency and performance in electronics manufacturing processes.