-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
3D Optical Inspection Provides ‘Eyes’ for Process Improvements in Industry 4.0
June 21, 2019 | Jenny Yuh, Koh Young Technology, and Brent Fischthal, Koh Young AmericaEstimated reading time: 3 minutes
Automated 3D solder paste inspection (SPI) and 3D automated optical inspection (AOI) systems have become an integral part of the printed circuit board assembly (PCBA) process because they help ensure high-quality production. As today’s board complexity is increasing, inspection technology becomes even more critical.
For example, while talking with Janet Tomor, senior business development manager at Suntronic Inc.—a contract manufacturer with facilities in Richardson and Houston, Texas—I-Connect007 Managing Editor, Nolan Johnson asked, “Streamlining must be something you talk about a lot [at Suntronic].”
Tomor replied, “The biggest impact for us has been automating almost everything except for putting your through-hole connector on the board by hand. We’ve automated most of our inspection and have improved quality. We went from 60% yield on our PCBA lines to 98.9% by adding automated 3D inspection from Koh Young.”
Tomor’s team also added 3D SPI equipment, continuing, “I’ll give you an example. We have a solder paste inspection machine on every line. We once put on a stencil, and it wouldn’t pass. The cause was that the stencil was too thick and applied too much solder paste. We would have had parts sliding all over the board because of the excess solder paste. That was a huge discovery and a change we made thanks to our SPI.”
While most manufacturers base quality decisions on a “good-bad” comparison of reference images, these decisions are easily influenced by variables like surface finish, board condition, component proximity, and more. However, data generated from 3D measurement systems provides meaningful insights about the process and helps manufacturers identify and eliminate the root causes of a defect. When manufacturers trust the data from the system, this helps to transform their operations and accurately control and monitor the PCBA process. What are the requirements of an inspection system to move from inspection to measurement, and ultimately to process control and optimization? Simply stated, the systems must satisfy the three “Rs” for measurement data: reliable, repeatable, and relatable.
When Johnson asked Tomor which equipment they were using to automate inspection, her answer was straightforward: “Koh Young.”
Reliable
Koh Young’s implementation of full 3D coverage monitors performance to detect common defects, such as missing or wrong components, and accurately identifies other issues, such as coplanarity and lead bridging. By measuring components and solder joints, and then offering critical height information to the inspection algorithms, contract manufacturers can use reliable measurements to identify errors during the production process. For example, after Suntronic adopted Koh Young 3D inspection solutions, their yields increased into the high 90% range, which has helped to transform their operations. But what’s next?
How can they continue to improve? Tomor further commented, “We also have a post-reflow AOI after the oven tells us if anything shifted. It uses true 3D technology, so it can measure if the part is skewed, missing, shifted, tombstoned, etc. Between the Koh Young SPI and AOI solutions, we increased our yield.” When asked what else helps with streamlining the assembly process, Tomor simply stated, “New equipment helps a lot.”
That new equipment solution, though, pays off by prioritizing data over raw throughput. Global competition means that manufacturers place challenging demands on process solutions. Manufacturers want to monitor and adapt the process to achieve zero defects by accessing all of the data anytime, anywhere. Moreover, manufacturers want process optimization. 3D inspection solutions have been instrumental in providing better data in the form of body and lead tip measurement, allowing the new equipment to quantify shape, coplanarity, solder amount, etc.
To read the full article, which appeared in the June 2019 issue of SMT007 Magazine, click here.
Suggested Items
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.