-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Rules or Recommendations?
September 10, 2019 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
Recently, I made a 150-mile trip with Junebug, my Mini Cooper. The route took me over the Cascade Mountains of Oregon and into the high desert that runs from southeast Washington State to northern Arizona. I’d just recently installed brand new run-flat tires, and this was my first long-haul drive on the new shoes. It did not go well.
Driving down the interstate just a bit faster than prevailing traffic (in this case, 75–80 mph), I felt every single rut and wrinkle in the road surface. Slowly, and inevitably, as I drove the mountain passes into the interior of Oregon, the handling worsened by a lot. When I rolled into my destination city, the steering was uncontrollable. I was convinced that I’d broken the steering rack; my car was all over the road no matter how I steered her. Thankfully, there was a store nearby for the retail outfit that sold me the tires, so I hobbled my way into their service bay.
"That was the most life-threatening ride I've ever had," I confessed to the service manager, "either I blew up my steering rack, or these are absolutely the WRONG tires for my car." The technicians were already pulling the tires and wheels off of Junebug even as I described the issue.
Thirty seconds later, a technician waved me over for the root-cause analysis. The driver’s rear tire had a seven-inch split in it—not a cut, not a slash, but what looked like a manufacturing failure. However, the flat run-flat didn't look flat; it looked as normal as the other three tires. The technician said, "Well, sir, there's the problem. We'll get a new one mounted on your car. How long had you been driving on it that way?" I replied, "Oh, I don't know… 150 miles give-or-take."
He concluded, "That explains why it was getting sloppy; the standard says '50 miles at 50 miles an hour.'" Chuckling, I added, "I guess I took that as more like a recommendation." An hour later, I was on my way with four good tires and a car that went where I pointed her.
While it wasn't pretty, that tire did its job and got me where I needed to go even while going well beyond what it was specified to deliver. The point is that there are rules, and then there are recommendations. One person's rule might be another person's recommendation and vice versa. That is where standards come into play. What are they? What do they mean? How do they get specified? And what are the impacts on our industry? Sometimes, the way you treat them is situational.
To read the full article, which appeared in the September 2019 issue of SMT007 Magazine, click here.
Suggested Items
AT&S Brings High-Tech to the Museumsquartier
05/06/2024 | AT&SAT&S, as a “MQ goes Green” partner, has prepared special highlights for the occasion: Visitors aged eight and above can embark on an interactive journey through the fascinating world of microelectronics.
Seeking Employment: Palash Pranav Vyas
05/03/2024 | Barry Matties, I-Connect007Despite skilled worker shortages across the industry, there are many educated and qualified individuals ready to contribute to electronics manufacturing. Here we profile Palash Pranav Vyas, a Ph.D. candidate at Auburn University whose work in drop shock reliability won him Best Student Poster at IPC APEX EXPO 2024.
The New Industry: Will the Growth Continue?
04/30/2024 | I-Connect007 Editorial TeamHow sustainable are the primary financial models in the United States regarding PCB fabrication shops? In this interview with economic experts Shawn DuBravac and Tom Kastner, we explore what’s happening with U.S. printed circuit board shops in today’s market, how consolidation affects the industry, and what can be done.
Marcy's Musings: The Growing Industry
04/16/2024 | Marcy LaRont -- Column: Marcy's MusingsAfter decades of steady decline in the U.S. and Europe, the PCB industry is finally growing, especially in China Plus One countries. The U.S. for example, which seemed to have abdicated its title as the world leader in innovating high-technology cutting-edge manufacturing processes, is now in a race to regain what it lost and then some. The PCB fabrication industry is growing in the West, thanks to DoD funding, the CHIPS and Science Act, and hopefully, the passing of HR 3249, the Printed Circuit Board and Substrates Act.
PCB007 Magazine April 2024 — The Growing Industry Issue
04/15/2024 | I-Connect007 Editorial TeamAfter more than two decades of steady decline in the U.S., the PCB industry is finally growing in the West thanks to the CHIPS and Science Act, DoD funding, and hopefully, the passing of HR 3249, the Printed Circuit Board and Substrates Act. The U.S. is now in a race to regain what was lost and then some. But what does “growing” look like for the organizations that have received DoD funding, and for the rest of us? How can we sustain this growth?