-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Just Ask Greg: Advice on Purchasing SMT Stencils
October 21, 2020 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
We asked you to send in your questions for Happy Holden, Joe Fjelstad, Eric Camden, and John Mitchell in our “Just Ask” series. Now, Greg Smith, an SMT007 columnist, gets a chance to answer a question.
Greg Smith has worked in the electronics industry since 1989. He was the owner and president of a stencil manufacturing company for 23 years before joining Fineline Stencil. After the merger of Fineline Stencil and MET, he became the manager of stencil technology for BlueRing Stencils. Greg writes and presents white papers, works with customers on stencil design, and performs root-cause analyses to improve customer yields.
We hope you enjoy “Just Ask Greg.”
Q: Should we buy just the foil, or do you think that it’s better to buy and keep them on the same frame for repeat orders?
A: There are several options when purchasing SMT stencils. The first option is framed stencils, where a polyester mesh is mounted to an aluminum frame, and the stencil foil is then mounted to the polyester mesh. The mesh is then removed within the stencil foil, leaving a very uniform tension on the foil from all four sides. This is historically the best method for using SMT stencils. When the stencil is needed, it can be placed directly into the printer, used, cleaned, and then placed back in storage.
With this traditional framed stencil, there are no worries about tensioning bladders that can leak during the mounting or de-mounting process or springs that can become week over time. However, some of these frames require more storage space than the non-traditional “frameless” systems available.
The second type of frame option is foils with tensioning systems around the sides of the foils, such as DEK VectorGuard™, Apshen, and QTS systems. These fit into “master frames,” and tension is applied to the foils before printing. These are good options when stencil storage is at a premium while still providing even tension on the stencil foil during the print process. It is not recommended to order stencils that are not tensioned in some way during the print process.
Suggested Items
RTX's Advanced Ground System for Space-based Missile Warning Now Operational
05/06/2024 | RTXAn advanced ground system for space-based missile warning developed by Raytheon, an RTX business, is now operational at the U.S. Space Force's Overhead Persistent Infrared Battlespace Awareness Center (OBAC).
BrainChip, Frontgrade Gaisler to Augment Space-Grade Microprocessors with AI Capabilities
05/06/2024 | BUSINESS WIREBrainChip Holdings Ltd, the world’s first commercial producer of ultra-low power, fully digital, event-based, neuromorphic AI IP, and Frontgrade Gaisler, a leading provider of space-grade system-on-chip solutions, announce their collaboration to explore the integration of BrainChip’s AkidaTM neuromorphic processor into Frontgrade Gaisler’s next generation fault-tolerant, radiation-hardened microprocessors.
Argonne, Toyota Collaborate on Cutting-Edge Battery Recycling Process
05/01/2024 | BUSINESS WIREThe U.S. Department of Energy’s (DOE) Argonne National Laboratory has recently launched a collaboration with Toyota Motor North America that could reduce the nation’s reliance on foreign sources of battery materials.
Real Time with… IPC APEX EXPO 2024: Outlining Rehm's Innovations and Global Presence
05/01/2024 | Real Time with...IPC APEX EXPOMichael Hanke, the chief sales officer for Rehm Thermal Systems, shares insights on the North American market, new machinery, and software development. He also discusses Rehm's turnkey solutions, process flexibility, global presence, and the dedicated team of 700 employees working on global solutions.
The Knowledge Base: A CM’s Perspective on Box Build Practices
04/30/2024 | Mike Konrad -- Column: The Knowledge BaseIn the ever-evolving landscape of electronics manufacturing, the box-build process stands out as a critical phase that bridges the gap between individual component manufacturing and the delivery of a fully functional electronic system. This intricate procedure, encompassing the assembly of everything from PCBs to wire harnesses and mechanical enclosures, demands a high level of precision, efficiency, and innovation. As the electronics assembly industry expands and diversifies, understanding the best practices within box-build assembly has become paramount for manufacturers aiming to stay ahead in a competitive market.